美国仓储, 美国仓, 国际快递, 货代, 联邦第三方账号, UPS第三方账号, DHL第三方账号

美国仓储与配送

直接从美国发货,节省国际快递成本,增加客户满意度。。。

进一步了解 »

中美专线(空加派)

专业可靠的美国清关、派送。最适合空加派、海加派、FBA专线头程代理。。。

进一步了解 »

美国仓储, 美国仓, 国际快递, 货代, 联邦第三方账号, UPS第三方账号, DHL第三方账号

地址:
1439 N Franklin St.
Pittsburgh, PA 15233 USA

电话:001(412)281-6699
WeChat: SineTradingUSA

电子邮件 »

从中国向美国出口反倾销商品需要注意的几个问题


    可不可以向美国出口铅笔?衣架呢?向美国出口被列为反倾销商品至少会涉及到如下4个方面的问题:

    1. 到底哪些商品被美国列为反倾销商品?
    2. 反倾销的产品能不能出口到美国?是否违法美国法律?
    3. 如果能出口到美国,具体到你的公司是否愿意去出口?
    4. 如果愿意出口,如何操作?
  美国仓储, 美国仓, 国际快递, 货代, 联邦第三方账号, UPS第三方账号, DHL第三方账号

哪些商品是反倾销商品:下面表格中赛因列举了美国商务部发布的美国将中国商品列为反倾销的目录,并进行了简单的翻译。此目录仅供参考之用。具体目录及详细解释,请参阅美国商务部的文件。使用时,可以先查看第一栏的翻译,看看你感兴趣的产品是否与这些产品有关联。如果有关联的话,再去查看第二栏和第三栏的具体描述。

对美国出口被列为反倾销的产品并没有违法美国任何法律。所以向美国出口反倾销商品不是能不能出口的问题,而是愿不愿意的问题。

而要回答这个愿不愿意出口反倾销商品的问题,这要看你在整个出口流程中是承担的什么角色。你是卖家?还是货代?不管是卖家还是货代,都需要明确知道下面几个事实:反倾销商品的关税通常是100%,200%,甚至300%。美国海关在清关时检查反倾销商品的比例是非常高的。而被海关查货不管是对卖家来说还是对货代来说都是一件非常头疼的事情。交了关税了,海关放货了,这次进口的事情还远远没有了解。清关的时候是需要购买Bond的(Bond就相当于是保险)。如果涉及到反倾销的话,保险公司很快就会开始要求进口商汇报跟这次进口相关的情况,还要提供进口商过去一年的财务证明。如果进口商购买的是Annual Bond的话,到第二年需要续保的时候,保险公司可能不再愿意给这个进口商投保,即使是愿意投保,保险费也可能是非常高的。所以,在愿不愿意对美国出口反倾销商品这个问题上,需要均衡的去考虑所获得的利润是否大于付出的代价。

假设你决定要对美国出口反倾销商品(或者在不知情的情况下涉及到了反倾销商品),那怎么操作呢?操作过程中要注意哪些问题呢?对这个问题的简单回答是:老老实实的向美国海关汇报商品的内容和价值。更具体的操作过程中要注意的事项,请直接联系赛因。

HTS CODE(海关编码)

 

DISCRIPTION (描述)

 

Exclude(不包括)

 

2931.00.9043. 2811.19.6090
羟基乙叉二膦酸
1-Hydroxyethylidene-1, 1-Diphosphonic Acid (Hedp) The merchandise covered by this order includes all grades
of aqueous, acidic (non-neutralized) concentrations of 1-
hydroxyethylidene-1, 1-diphosphonic acid\2\, also referred to as
hydroxethlylidenediphosphonic acid, hydroxyethanediphosphonic acid,  and etidronic acid
The CAS (Chemical Abstract
Service) registry number for HEDP is 2809-21-4. The merchandise subject
to this order is currently classified in the Harmonized Tariff
Schedule of the United States (``HTSUS'') at subheading 2931.00.9043.
It may also enter under HTSUS subheading 2811.19.6090. While HTSUS
subheadings are provided for convenience and customs purposes, the
written description of the scope of this proceeding is dispositive.
3802.10.00
活性炭
Activated Carbon: The merchandise subject to the order is certain activated carbon. Certain activated carbon is a powdered, granular, or pelletized carbon product obtained by “activating” with heat and steam various materials containing carbon, including but not limited to coal (including bituminous, lignite, and anthracite), wood, coconut shells, olive stones, and peat. The thermal and steam treatments remove organic materials and create an internal pore structure in the carbon material. The producer can also use carbon dioxide gas (“CO2”) in place of steam in this process. The vast majority of the internal porosity developed during the high temperature steam (or CO2 gas) activated process is a direct result of oxidation of a portion of the solid carbon atoms in the raw material, converting them into a gaseous form of carbon. The scope of the order covers all forms of activated carbon that are activated by steam or CO2, regardless of the raw material, grade,  mixture, additives, further washing or post-activation chemical treatment (chemical or water washing, chemical impregnation or other treatment), or product form. Unless specifically excluded, the scope of the order covers all physical forms of certain activated carbon, including powdered activated carbon (“PAC”), granular activated carbon (“GAC”), and pelletized activated carbon.

Also excluded from the scope are reactivated carbons. Reactivated carbons are previously used activated carbons that have had adsorbed materials removed from their pore structure after use through the application of heat, steam and/or chemicals.

Also excluded from the scope is activated carbon cloth. Activated carbon cloth is a woven textile fabric made of or containing activated carbon fibers. It is used in masks and filters and clothing of various types where a woven format is required.

Any activated carbon meeting the physical description of subject merchandise provided above that is not expressly excluded from the scope is included within the scope. The products subject to the order are currently classifiable under the Harmonized Tariff Schedule of the United States (“HTSUS”) subheading 3802.10.00. Although the HTSUS subheading is provided for convenience and customs purposes, the written description of the scope of the order is dispositive.
Excluded from the scope of the order are chemically activated carbons. The carbon-based raw material used in the chemical activation process is treated with a strong chemical agent, including but not limited to phosphoric acid, zinc chloride, sulfuric acid or potassium hydroxide that dehydrates molecules in the raw material, and results in the formation of water that is removed from the raw material by moderate heat treatment. The activated carbon created by chemical activation has internal porosity developed primarily due to the action of the chemical dehydration agent. Chemically activated carbons are typically used to activate raw materials with a lignocellulosic component such as cellulose, including wood, sawdust, paper mill waste and peat.

7615.19.10 7615.19.30 7615.19.50 7615.19.70 7615.19.90 7616.99.10 7616.99.50 8302.10.3000 8302.10.6030 8302.10.6060 8302.10.6090 8302.30.3010 8302.30.3060 8302.41.3000 8302.41.6015 8302.41.6045 8302.41.6050 8302.41.6080 8302.42.3010 8302.42.3015 8302.42.3065 8302.49.6035 8302.49.6045 8302.49.6055 8302.49.6085 8302.50.0000 8302.60.9000 8306.30.0000 8419.90.1000 8479.89.98 8479.90.94 8513.90.20 8515.90.2000 9403.10.00 9403.20.00 9403.90.1040 9403.90.1050 9403.90.1085 9403.90.2540 9403.90.2580 9403.90.4005 9403.90.4010 9403.90.4060 9403.90.5005 9403.90.5010 9403.90.5080 9403.90.6005 9403.90.6010 9403.90.6080 9403.90.7005 9403.90.7010 9403.90.7080 9403.90.8010 9403.90.8015 9403.90.8020 9403.90.8030 9403.90.8041 9403.90.8051 9403.90.8061 9506.11.4080 9506.51.4000 9506.51.6000 9506.59.4040 9506.70.2090 9506.91.0010 9506.91.0020 9506.91.0030 9506.99.0510 9506.99.0520 9506.99.0530 9506.99.1500 9506.99.2000 9506.99.2580 9506.99.2800 9506.99.6080 9507.30.2000 9507.30.4000 9507.30.6000 9507.90.6000
铝挤压材
Aluminum extrusions are produced and imported in a wide variety of shapes and forms, including, but not limited to, hollow profiles, other solid profiles, pipes, tubes, bars, and rods. Aluminum extrusions that are drawn subsequent to extrusion ("drawn aluminum") are also included in the scope.
Aluminum extrusions are produced and imported with a variety of finishes (both coatings and surface treatments), and types of fabrication. The types of coatings and treatments applied to subject aluminum extrusions include, but are not limited to, extrusions that are mill finished (i.e., without any coating or further finishing), brushed, buffed, polished, anodized (including bright-dip anodized), liquid painted, or powder coated. Aluminum extrusions may also be fabricated, i.e., prepared for assembly. Such operations would include, but are not limited to, extrusions that are cut-to-length, machined, drilled, punched, notched, bent, stretched, knurled, swedged, mitered, chamfered, threaded, and spun. The subject merchandise includes aluminum extrusions that are finished (coated, painted, etc.), fabricated, or any combination thereof.Subject aluminum extrusions may be described at the time of importation as parts for final finished products that are assembled after importation, including, [*30651] but not limited to, window frames, door frames, solar panels, curtain walls, or furniture. Such parts that otherwise meet the definition of aluminum extrusions are included in the scope. The scope includes the aluminum extrusion components that are attached (e.g., by welding or fasteners) to form subassemblies, i.e., partially assembled merchandise unless imported as part of the finished goods kit' defined further below. The scope does not include the non-aluminum extrusion components of subassemblies or subject kits.
Subject extrusions may be identified with reference to their end use, such as fence posts, electrical conduits, door thresholds, carpet trim, or heat sinks (that do not meet the finished heat sink exclusionary language below). Such goods are subject merchandise if they otherwise meet the scope definition, regardless of whether they are ready for use at the time of importation.
The following aluminum extrusion products are excluded: Aluminum extrusions made from aluminum alloy with an Aluminum Association series designations commencing with the number 2 and containing in excess of 1.5 percent copper by weight; Aluminum extrusions made from aluminum alloy with an Aluminum Association series designation commencing with the number 5 and containing in excess of 1.0 percent magnesium by weight; and aluminum extrusions made from aluminum alloy with an Aluminum Association series designation commencing with the number 7 and containing in excess of 2.0 percent zinc by weight.
The scope also excludes finished merchandise containing aluminum extrusions as parts that are fully and permanently assembled and completed at the time of entry, such as finished windows with glass, doors with glass or vinyl, picture frames with glass pane and backing material, and solar panels. The scope also excludes finished goods containing aluminum extrusions that are entered unassembled in a "finished goods kit." A finished goods kit is understood to mean a packaged combination of parts that contains, at the time of importation, all of the necessary parts to fully assemble a final finished good and requires no further finishing or fabrication, such as cutting or punching, and is assembled "as is" into a finished product. An imported product will not be considered a "finished goods kit" and therefore excluded from the scope of the investigation merely by including fasteners such as screws, bolts, etc. in the packaging with an aluminum extrusion product.

The scope also excludes aluminum alloy sheet or plates produced by other than the extrusion process, such as aluminum products produced by a method of casting. Cast aluminum products are properly identified by four digits with a decimal point between the third and fourth digit. A letter may also precede the four digits. The following Aluminum Association designations are representative of aluminum alloys for casting: 208.0, 295.0, 308.0, 355.0, C355.0, 356.0, A356.0, A357.0, 360.0, 366.0, 380.0, A380.0, 413.0, 443.0, 514.0, 518.1, and 712.0. The scope also excludes pure, unwrought aluminum in any form.
The scope also excludes collapsible tubular containers composed of metallic elements corresponding to alloy code 1080A as designated by the Aluminum Association where the tubular container (excluding the nozzle) meets each of the following dimensional characteristics: (1) Length of 37 mm or 62 mm, (2) outer diameter of 11.0 mm or 12.7 mm, and (3) wall thickness not exceeding 0.13 mm.

Also excluded from the scope of this order are finished heat sinks. Finished heat sinks are fabricated heat sinks made from aluminum extrusions the design and production of which are organized around meeting certain specified thermal performance requirements and which have been fully, albeit not necessarily individually, tested to comply with such requirements.
Imports of the subject merchandise are provided for under the following categories of the Harmonized Tariff Schedule of the United States ("HTS"): 7604.21.0000, 7604.29.1000, 7604.29.3010, 7604.29.3050, 7604.29.5030, 7604.29.5060, 7608.20.0030, and 7608.20.0090. The subject merchandise entered as parts of other aluminum products may be classifiable under the following additional Chapter 76 subheadings: 7610.10, 7610.90, 7615.19, 7615.20, and 7616.99 as well as under other HTS chapters. In addition, fin evaporator coils may be classifiable under HTS numbers: 8418.99.80.50 and 8418.99.80.60. While HTS subheadings are provided for convenience and customs purposes, the written description of the scope is dispositive.
 7604.21.0000, 7604.29.1000, 7604.29.3010, 7604.29.3050, 7604.29.5030, 7604.29.5060, 7608.20.0030,  7608.20.0090. 
铝挤压材
The merchandise covered by this order is aluminum extrusions which are shapes and forms, produced by an extrusion process, made from aluminum alloys having metallic elements corresponding to the alloy series designations published by The Aluminum Association commencing with the numbers 1, 3, and 6 (or proprietary equivalents or other certifying body equivalents). Specifically, the subject merchandise made from aluminum alloy with an Aluminum Association series designation commencing with the number 1 contains not less than 99 percent aluminum by weight. The subject merchandise made from aluminum alloy with an Aluminum Association series designation commencing with the number 3 contains manganese as the major alloying element, with manganese accounting for not more than 3.0 percent of total materials by weight. The subject merchandise is made from an aluminum alloy with an Aluminum Association series designation commencing with the number 6 contains magnesium and silicon as the major alloying elements, with magnesium accounting for at least 0.1 percent but not more than 2.0 percent of total materials by weight, and silicon accounting for at least 0.1 percent but not more than 3.0 percent of total materials by weight. The subject aluminum extrusions are properly identified by a four-digit alloy series without either a decimal point or leading letter. Illustrative examples from among the approximately 160 registered alloys that may characterize the subject merchandise are as follows: 1350, 3003, and 6060. Aluminum extrusions are produced and imported in a wide variety of shapes and forms, including, but not limited to, hollow profiles, other solid profiles, pipes, tubes, bars, and rods. Aluminum extrusions that are drawn subsequent to extrusion (‘‘drawn aluminum’’) are also included in the scope.Aluminum extrusions are produced and imported with a variety of finishes (both coatings and surface treatments), and types of fabrication. The types of coatings and treatments applied to subject aluminum extrusions include, but are not limited to, extrusions that are mill finished (i.e., without any coating or further finishing), brushed, buffed, polished, anodized (including bright-dip anodized), liquid painted, or powder coated. Aluminum extrusions may also be fabricated, i.e., prepared for assembly. Such operations would include, but are not limited to, extrusions that are cut-to-length, machined, drilled, punched, notched, bent, stretched, knurled, swedged, mitered, chamfered, threaded, and spun. The subject merchandise includes aluminum extrusions that are finished (coated, painted, etc.), fabricated, or any combination thereof.

Subject aluminum extrusions may be described at the time of importation as parts for final finished products that are assembled after importation, including, but not limited to, window frames, door frames, solar panels, curtain walls, or furniture. Such parts that otherwise meet the definition of aluminum extrusions are included in the scope. The scope includes the aluminum extrusion components that are attached (e.g., by welding or fasteners) to form subassemblies, i.e., partially assembled merchandise unless imported as part of the finished goods ‘‘kit’’ defined further below. The scope does not include the non-aluminum extrusion components of subassemblies or subject kits.

Subject extrusions may be identified with reference to their end use, such as fence posts, electrical conduits, door thresholds, carpet trim, or heat sinks (that do not meet the finished heat sink exclusionary language below). Such goods are subject merchandise if they otherwise meet the scope definition, regardless of whether they are ready for use at the time of importation.

Aluminum extrusions are produced and imported with a variety of finishes (both coatings and surface treatments), and types of fabrication. The types of coatings and treatments applied to subject aluminum extrusions include, but are not limited to, extrusions that are mill finished (i.e., without any coating or further finishing), brushed, buffed, polished, anodized (including bright-dip anodized), liquid painted, or powder coated. Aluminum extrusions may also be fabricated, i.e., prepared for assembly. Such operations would include, but are not limited to, extrusions that are cut-to-length, machined, drilled, punched, notched, bent, stretched, knurled, swedged, mitered, chamfered, threaded, and spun. The subject merchandise includes aluminum extrusions that are finished (coated, painted, etc.), fabricated, or any combination thereof.

Subject aluminum extrusions may be described at the time of importation as parts for final finished products that are assembled after importation, including, but not limited to, window frames, door frames, solar panels, curtain walls, or furniture. Such parts that otherwise meet the definition of aluminum extrusions are included in the scope. The scope includes the aluminum extrusion components that are attached (e.g., by welding or fasteners) to form subassemblies, i.e., partially assembled merchandise unless imported as part of the finished goods ‘‘kit’’ defined further below. The scope does not include the non-aluminum extrusion components of subassemblies or subject kits.

Subject extrusions may be identified with reference to their end use, such as fence posts, electrical conduits, door thresholds, carpet trim, or heat sinks (that do not meet the finished heat sink exclusionary language below). Such goods are subject merchandise if they otherwise meet the scope definition, regardless of whether they are ready for use at the time of importation.
The following aluminum extrusion products are excluded: Aluminum extrusions made from aluminum alloy with an Aluminum Association series designations commencing with the number 2 and containing in excess of 1.5 percent copper by weight; aluminum extrusions made from aluminum alloy with an Aluminum Association series designation commencing with the number 5 and containing in excess of 1.0 percent magnesium by weight; and aluminum extrusions made from aluminum alloy with an Aluminum Association series designation commencing with the number 7 and containing in excess of 2.0 percent zinc by weight.The scope also excludes finished merchandise containing aluminum extrusions as parts that are fully and permanently assembled and completed at the time of entry, such as finished windows with glass, doors with glass or vinyl, picture frames with glass pane and backing material, and solar panels.

The scope also excludes finished goods containing aluminum extrusions that are entered unassembled in a ‘‘finished goods kit.’’ A finished goods kit is understood to mean a packaged combination of parts that contains, at the time of importation, all of the necessary parts to fully assemble a final finished good and requires no further finishing or fabrication, such as cutting or punching, and is assembled ‘‘as is’’ into a finished product. An imported product will not be considered a ‘‘finished goods kit’’ and therefore excluded from the scope of the investigation merely by including fasteners such as screws, bolts, etc. in the packaging with an aluminum
extrusion product.

The scope also excludes aluminum alloy sheet or plates produced by other than the extrusion process, such as aluminum products produced by a method of casting. Cast aluminum products are properly identified by four digits with a decimal point between the third and fourth digit. A letter may also precede the four digits. The following Aluminum Association designations are representative of aluminum alloys for casting: 208.0, 295.0, 308.0, 355.0, C355.0, 356.0, A356.0, A357.0, 360.0, 366.0, 380.0, A380.0, 413.0, 443.0, 514.0, 518.1, and 712.0. The scope also excludes pure, unwrought aluminum in any form.

The scope also excludes collapsible tubular containers composed of metallic elements corresponding to alloy code 1080A as designated by the Aluminum Association where the tubular container (excluding the nozzle) meets each of the following dimensional characteristics: (1) Length of 37 mm or 62 mm, (2) outer diameter of 11.0 mm or 12.7 mm, and (3) wall thickness not exceeding 0.13 mm. Also excluded from the scope of this order are finished heat sinks. Finished heat sinks are fabricated heat sinks made from aluminum extrusions the design and production of which are organized around meeting certain specified thermal performance requirements and which have been fully, albeit not necessarily individually, tested to comply with such requirements.
2009.79.00.20
非冷冻的浓缩苹果汁
Apple Juice Concentrate, Non-FrozenThe product covered by this order is certain non-frozen apple juice concentrate (“AJC”). Certain AJC is defined as all non-frozen concentrated apple juice with a Brix scale of 40 or greater, whether or not containing added sugar or other sweetening matter, and whether or not fortified with vitamins or minerals. Excluded from the scope of this order are: frozen concentrated apple juice; non-frozen concentrated apple juice that has been fermented; and non-frozen concentrated apple juice to which spirits have been added.
5901.90.20.00   5901.90.40.00
艺术画布产品
Artist Canvashe products covered by this order are artist canvases regardless of dimension and/or size, whether assembled or unassembled, that have been primed/coated, whether or not made from cotton, whether or not archival, whether bleached or unbleached, and whether or not containing an ink receptive top coat. Priming/coating includes the application of a solution, designed to promote the adherence of artist materials, such as paint or ink, to the fabric. Artist canvases (i.e., pre– stretched canvases, canvas panels, canvas pads, canvas rolls (including bulk rolls that have been primed), printable canvases, floor cloths, and placemats) are tightly woven prepared painting and/or printing surfaces. Artist canvas and stretcher strips (whether or not made of wood and whether or not assembled) included within a kit or set are covered by this proceeding Specifically excluded from the scope of this order are tracing cloths, ‘‘paint–by-number’’ or ‘‘paint–ityourself’’ artist canvases with a copyrighted preprinted outline, pattern, or design, whether or not included in a painting set or kit.1 Also excluded are stretcher strips, whether or not made from wood, so long as they are not incorporated into artist canvases or sold as part of an artist canvas kit or set. While the HTSUS subheadings are
provided for convenience and customs purposes, our written description of the scope of this proceeding is dispositive. 
2836.60.0000
碳酸钡
Barium Carbonate from the PRC
The merchandise covered by this order is barium carbonate, regardless of form or grade.
2827.39.45.00
氯化钡
Barium Chloride  The merchandise covered by the order is barium chloride, a chemical compound having the formulas BaCl2 or BaCl2-2H2O
2827.38.00
氯化钡
Barium Chloride Imports covered by the review are shipments of barium chloride, a chemical compound having the formula BaCl[2] or BaCl[2] -2H[2] O, 
2828.10.0000
次氯酸钙 或漂白粉
Calcium Hypochlorite  The product covered by this order is calcium hypochlorite, regardless of form (e.g., powder, tablet (compressed), crystalline (granular), or in liquid solution), whether or not blended with other materials, containing at least 10 percent available chlorine measured by actual weight. The scope also includes bleaching powder and hemibasic calcium hypochlorite.
Calcium hypochlorite has the general chemical formulation Ca(OCl)2, but may also be sold in a more dilute form as bleaching powder with the chemical formulation, Ca(OCl)2.CaCl2.Ca(OH)2.2H2O or hemibasic calcium hypochlorite with the chemical formula of 2Ca(OCl)2.Ca(OH)2 or Ca(OCl)2.0.5Ca(OH)2. Calcium hypochlorite has a Chemical Abstract Service (“CAS”) registry number of 7778-54-3, and a U.S. Environmental Protection Agency (“EPA”) Pesticide Code (“PC”) Number of 014701. The subject calcium hypochlorite has an International Maritime Dangerous Goods (“IMDG”) code of Class 5.1 UN 1748, 2880, or 2208 or Class 5.1/8 UN 3485, 3486, or 3487. 
3808.94.5000 3808.99.9500
次氯酸钙 或漂白粉与其它物质的混合物
Calcium Hypochlorite blended with other materials
3204.17.9040
咔唑紫颜料
Carbazole Violet Pigment 23 The merchandise subject to this antidumping duty order is carbazole violet pigment 23 identified as Color Index No. 51319 and Chemical Abstract No. 6358-30-1, with the chemical name of diindolo [3,2-b:3',2'-m] triphenodioxazine, 8,18-dichloro-5, 15-diethy-5, 15-dihydro-, and molecular formula of C34H22Cl2N4O2.(Footnote 1) The subject merchandise includes the crude pigment in any form (e.g., dry powder, paste, wet cake) and finished pigment in the form of presscake and dry color. Pigment dispersions in any form (e.g. pigment dispersed in oleoresins, flammable solvents, water) are not included within the scope of the order.
7213.91.3011, 7213.91.3015, 7213.91.3020, 7213.91.3093; 7213.91.4500, 7213.91.6000, 7213.99.0030, 7227.20.0030, 7227.20.0080, 7227.90.6010, 7227.90.6020, 7227.90.6030 7227.90.6035 7213.99.0090  7227.90.6090
碳钢和某些合金钢盘条
Carbon And Certain Alloy Steel Wire Rod The scope of this order covers certain hot-rolled products of carbon steel and alloy steel, in coils, of approximately circular cross section, less than 19.00 mm in actual solid cross-sectional diameter. Specifically excluded are steel products possessing the above-noted physical characteristics and meeting the Harmonized Tariff Schedule of the United States (HTSUS) definitions for (a) stainless steel; (b) tool steel; (c) high nickel steel; (d) ball bearing steel; or (e) concrete reinforcing bars and rods. Also excluded are free cutting steel (also known as free machining steel) products (i.e., products that contain by weight one or more of the following elements: 0.1 percent or more of lead, 0.05 percent or more of bismuth, 0.08 percent or more of sulfur, more than 0.04 percent of phosphorus, more than 0.05 percent of selenium, or more than 0.01 percent of tellurium). All products meeting the physical description of subject merchandise that are not specifically excluded are included in this scope.
7307.93.90
碳钢对接焊接管接头
Carbon Steel Butt-Weld Pipe Fittings Carbon steel butt-weld pipe fittings, having an inside diameter of less than 14 inches, imported in either finished or unfinished form. These formed or forged pipe fittings are used to join sections in piping systems where conditions require permanent, welded connections, as distinguished from fittings based on other fastening methods (e.g., threaded, grooved, or bolted fittings).
7208.40.3030, 7208.40.3060, 7208.51.0030, 7208.51.0045, 7208.51.0060, 7208.52.0000, 7208.53.0000, 7208.90.0000, 7210.70.3000, 7210.90.9000, 7211.13.0000, 7211.14.0030, 7211.14.0045, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7212.50.0000
某些定长剪切的碳钢
Certain Cut-To-Length Carbon Steel The merchandise covered by this order is Certain Cut-to-length Carbon Steel Plate from the People's Republic of China. Included in this description is hot-rolled iron and non-alloy steel universal mill plates (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm but not exceeding 1250 mm and of a thickness of not less than 4 mm, not in coils and without patterns in relief), of rectangular shape, neither clad, plated nor coated with metal, whether or not painted, varnished, or coated with plastics or other nonmetallic substances; and certain iron and non-alloy steel flat-rolled products not in coils, of rectangular shape, hot-rolled, neither clad, plated, nor coated with metal, whether or not painted, varnished, or coated with plastics or other nonmetallic substances, 4.75 mm or more in thickness and of a width which exceeds 150 mm and measures at least twice the thickness. Included as subject merchandise in this order are flat-rolled products of nonrectangular cross- section where such cross-section is achieved subsequent to the rolling process (i.e., products which have been ``worked after rolling'')--for example, products which have been bevelled or rounded at the edges.
7208.10.15.00, 7208.10.30.00, 7208.10.60.00, 7208.25.30.00, 7208.25.60.00, 7208.26.00.30, 7208.26.00.60, 7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60, 7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30, 7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90, 7208.40.60.30, 7208.40.60.60, 7208.53.00.00, 7208.54.00.00, 7208.90.00.00, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00, 7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 7211.19.75.30, 7211.19.75.60, and 7211.19.75.90
某些热轧碳钢平板产品
Certain Hot-Rolled Carbon Steel Flat Products the products covered by the order are certain hot-rolled carbon steel flat products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with plastics or other non-metallic substances, in coils (whether or not in successively superimposed layers), regardless of thickness, and in straight lengths of a thickness of less than 4.75 mm and of a width measuring at least 10 times the thickness. Universal mill plate (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm, but not exceeding 1,250 mm, and of a thickness of not less than 4.0 mm, not in coils and without patterns in relief) of a thickness not less than 4.0 mm is not included within the scope of the order. Specifically included within the scope of the order are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (“IF”)) steels, high strength low alloy (“HSLA”) steels, and the substrate for motor lamination steels. IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium or niobium (also commonly referred to as columbium), or both, added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, vanadium, and molybdenum. The substrate for motor lamination steels contains micro-alloying levels of elements such as silicon and aluminum.
Steel products included in the scope of the order, regardless of definitions in the Harmonized Tariff Schedule of the United States (“HTSUS”), are products in which: i) iron predominates, by weight, over each of the other contained elements; ii) the carbon content is two percent or less, by weight; and, iii) none of the elements listed below exceeds the quantity, by weight, respectively indicated:
1.80 percent of manganese, or
2.25 percent of silicon, or
1.00 percent of copper, or
0.50 percent of aluminum, or
1.25 percent of chromium, or
0.30 percent of cobalt, or
0.40 percent of lead, or
1.25 percent of nickel, or
0.30 percent of tungsten, or
0.10 percent of molybdenum, or
0.10 percent of niobium, or
0.15 percent of vanadium, or
0.15 percent of zirconium.
All products that meet the physical and chemical description provided above are within the scope of the order unless otherwise excluded. The following products, for example, are outside or specifically excluded from the scope of the order:

Alloy hot-rolled steel products in which at least one of the chemical elements exceeds those listed above (including, e.g., American Society for Testing and Materials (“ASTM”) specifications A543, A387, A514, A517, A506).
Society of Automotive Engineers (“SAE”)/American Iron & Steel Institute (“AISI”) grades of series 2300 and higher.
Ball bearing steels, as defined in the HTSUS.
Tool steels, as defined in the HTSUS.
Silico-manganese (as defined in the HTSUS) or silicon electrical steel with a silicon level exceeding 2.25 percent.
ASTM specifications A710 and A736.
USS abrasion-resistant steels (USS AR 400, USS AR 500).
All products (proprietary or otherwise) based on an alloy ASTM specification (sample specifications: ASTM A506, A507).
Non-rectangular shapes, not in coils, which are the result of having been processed by cutting or stamping and which have assumed the character of articles or products classified outside chapter 72 of the HTSUS
7225.11.00.00, 7225.19.00.00, 7225.30.30.50, 7225.30.70.00, 7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 7226.11.90.30, 7226.11.90.60, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00, 7226.91.70.00,7226.91.80.00,7226.99.00.00 7210.70.30.00, 7210.90.90.00, 7211.14.00.30, 7212.40.10.00, 7212.40.50.00, 7212.50.00.00
某些热轧碳钢平板产品
Certain hot-rolled carbon steel flat products covered by the order, including: vacuum degassed fully stabilized; high strength low alloy; and the substrate for motor lamination steel may also enter under the following tariff numbers
2003.10.0127, 2003.10.0131, 2003.10.0137, 2003.10.0143,
2003.10.0147, 2003.10.0153,  0711.51.0000
某些蘑菇罐头
Certain Preserved Mushrooms The products covered by this antidumping duty order are certain
preserved mushrooms whether imported whole, sliced, diced, or as stems
and pieces. The preserved mushrooms covered under this order are the
species Agaricus bisporus and Agaricus bitorquis. ``Preserved
mushrooms'' refer to mushrooms that have been prepared or preserved by
cleaning, blanching, and sometimes slicing or cutting. These mushrooms
are then packed and heated in containers including but not limited to
cans or glass jars in a suitable liquid medium, including but not
limited to water, brine, butter or butter sauce. Preserved mushrooms
may be imported whole, sliced, diced, or as stems and pieces. Included
within the scope of the investigation are ``brined'' mushrooms, which
are presalted and packed in a heavy salt solution to provisionally
preserve them for further processing.
Excluded from the scope of this investigation are the following:
(1) all other species of mushroom, including straw mushrooms; (2) all
fresh and chilled mushrooms, including ``refrigerated'' or ``quick
blanched mushrooms''; (3) dried mushrooms; (4) frozen mushrooms; and
(5) ``marinated,'' ``acidified'' or ``pickled'' mushrooms, which are
prepared or preserved by means of vinegar or acetic acid, but may
contain oil or other additives.
2933.69.6015, 2933.69.6021, 2933.69.6050, 3808.40.50, 3808.50.40  3808.94.5000  2933.69.6015  2933.69.6050  2933.69.6021
三氯异氰尿酸; 氯化异氰尿酸酯
Chlorinated Isocyanurates The products covered by the order are chlorinated isocyanurates (chlorinated isos), which are derivatives of cyanuric acid, described as chlorinated s-triazine triones. There are three primary chemical compositions of chlorinated isos: (1) Trichloroisocyanuric acid (Cl3(NCO)3), (2) sodium dichloroisocyanurate (dihydrate) (NaCl2(NCO)3(2H2O), and (3) sodium dichloroisocyanurate (anhydrous) (NaCl2(NCO)3). Chlorinated isos are available in powder, granular, and tableted forms. The order covers all chlorinated isos.
2904.90.50
氯化苦; 三氯硝基甲烷
Chloropicrin   The merchandise covered by this order is chloropicrin, also known as trichloronitromethane. A major use of the product is as a pre-plant soil fumigant.
7306.40.5005; 7306.40.5040, 7306.40.5062, 7306.40.5064,  7306.40.5085 . 7306.40.1010; 7306.40.1015; 7306.40.5042, 7306.40.5044, 7306.40.5080,  7306.40.5090.
环形焊接奥氏体不锈钢管
Circular Welded Austenitic Stainless Pressure Pipe The merchandise covered by this order is circular welded austenitic stainless pressure pipe not greater than 14 inches in outside diameter. This merchandise includes, but is not limited to, the American Society for Testing and Materials (“ASTM”) A-312 or ASTM A-778 specifications, or comparable domestic or foreign specifications. ASTM A-358 products are only included when they are produced to meet ASTM A-312 or ASTM A-778 specifications, or comparable domestic or foreign specifications. Excluded from the scope are: (1) welded stainless mechanical tubing, meeting ASTM A-554 or comparable domestic or foreign specifications; (2) boiler, heat exchanger, superheater, refining furnace, feedwater heater, and condenser tubing, meeting ASTM A-249, ASTM A-688 or comparable domestic or foreign specifications; and (3) specialized tubing, meeting ASTM A-269, ASTM A-270 or comparable domestic or foreign specifications. 
7306.19.10.10, 7306.19.10.50, 7306.19.51.10, 7306.19.51.50.
圆形焊接碳质量钢管
Circular Welded Carbon Quality Steel Line Pipe The merchandise covered by this order is circular welded carbon quality steel pipe of a kind used for oil and gas pipelines (welded line pipe), not more than 406.4 mm (16 inches) in outside diameter, regardless of wall thickness, length, surface finish, end finish or stenciling.
7306.19.10.10, 7306.19.10.50, 7306.19.51.10, 7306.19.51.50.
圆形焊接碳质量钢管
Circular Welded Carbon Quality Steel Line Pipe The merchandise covered by this order is circular welded carbon quality steel pipe of a kind used for oil and gas pipelines (welded line pipe), not more than 406.4 mm (16 inches) in outside diameter, regardless of wall thickness, length, surface finish, end finish or stenciling.

The term ‘‘carbon quality steel’’ includes both carbon steel and carbon steel mixed with small amounts of alloying elements that may exceed the individual weight limits for non alloy steels imposed in the Harmonized Tariff Schedule of the United States (HTSUS). Specifically, the term ‘‘carbon quality’’ includes products in which (1) iron predominates by weight over each of the other contained elements, (2) the carbon content is 2 percent or less by weight and (3) none of the elements listed below exceeds the quantity by weight respectively indicated:
(i) 2.00 percent of manganese,
(ii) 2.25 percent of silicon,
(iii) 1.00 percent of copper,
(iv) 0.50 percent of aluminum,
(v) 1.25 percent of chromium,
(vi) 0.30 percent of cobalt,
(vii) 0.40 percent of lead,
(viii) 1.25 percent of nickel,
(ix) 0.30 percent of tungsten,
(x) 0.012 percent of boron,
(xi) 0.50 percent of molybdenum,
(xii) 0.15 percent of niobium,
(xiii) 0.41 percent of titanium,
(xiv) 0.15 percent of vanadium, or
(xv) 0.15 percent of zirconium.

Welded line pipe is normally produced to specifications published by the American Petroleum Institute (API) (or comparable foreign specifications) including API A–25, 5LA, 5LB, and X grades from 42 and above, and/or any other proprietary grades or non–graded material. Nevertheless, all pipe meeting the physical description set forth above that is of a kind used in oil and gas pipelines, including all multiple–stenciled pipe with an API welded line pipe stencil is covered by the scope of this order.
Excluded from this scope are pipes of a kind used for oil and gas pipelines that are multiple–stenciled to a standard and/or structural specification and have one or more of the following characteristics: is 32 feet in length or less; is less than 2.0 inches (50 mm) in outside diameter; has a galvanized and/ or painted surface finish; or has a threaded and/or coupled end finish. (The term ‘‘painted’’ does not include coatings to inhibit rust in transit, such as varnish, but includes coatings such as polyester.)
2918.14.0000  2918.15.1000
柠檬酸和柠檬酸盐
Citric Acid And Citrate Salt The scope of the order includes all grades and granulation sizes of citric acid, sodium citrate, and potassium citrate in their unblended forms, whether dry or in solution, and regardless of packaging type. The scope also includes blends of citric acid, sodium citrate, and potassium citrate; as well as blends with other ingredients, such as sugar, where the unblended form(s) of citric acid, sodium citrate, and potassium citrate constitute 40 percent or more, by weight, of the blend. The scope of the order also includes all forms of crude calcium citrate, including dicalcium citrate monohydrate, and tricalcium citrate tetrahydrate, which are intermediate products in the production of citric acid, sodium citrate, and potassium citrate. The scope of the order does not include calcium citrate that satisfies the standards set forth in the United States Pharmacopeia and has been mixed with a functional excipient, such as dextrose or starch, where the excipient constitutes at least 2 percent, by weight, of the product. The scope of the order includes the hydrous and anhydrous forms of citric acid, the dihydrate and anhydrous forms of sodium citrate, otherwise known as citric acid sodium salt, and the monohydrate and monopotassium forms of potassium citrate. Sodium citrate also includes both trisodium citrate and monosodium citrate, which are also known as citric acid trisodium salt and citric acid monosodium salt, respectively. 
3824.90.9290
柠檬酸钾和柠檬酸钙
Potassium citrate and crude calcium citrate are classifiable under 
4810.14.11 4810.14.1900 4810.14.2010 4810.14.2090 4810.14.5000 4810.14.6000 4810.14.70 4810.19.1100 4810.19.1900 4810.19.2010 4810.19.2090 4810.22.1000 4810.22.50 4810.22.6000 4810.22.70 4810.29.1000 4810.29.1035 4810.29.5000 4810.29.6000 4810.29.70 4810.29.7035 4810.32.10 4810.32.30 4810.32.65 4810.39.12 4810.39.14 4810.39.30 4810.39.65 4810.92.12 4810.92.1235 4810.92.14 4810.92.1435 4810.92.30 4810.92.65 4810.92.6535.
涂布纸,适用于高质印刷图形使用单张纸印刷机
Coated Paper Suitable For High-Quality Print Graphics Using Sheet-Fed Presses The merchandise covered by this order includes certain coated paper and paperboard “‘Paperboard’ refers to Certain Coated Paper that is heavier, thicker and more rigid than coated paper which otherwise meets the product description. In the context of Certain Coated Paper, paperboard typically is referred to as ‘cover,’ to distinguish it from ‘text.’” in sheets suitable for high quality print graphics using sheet-fed presses; coated on one or both sides with kaolin (china or other clay), calcium carbonate, titanium dioxide, and/or other inorganic substances; with or without a binder; having a GE brightness level of 80 or higher One of the key measurements of any grade of paper is brightness. Generally speaking, the brighter the paper the better the contrast between the paper and the ink. Brightness is measured using a GE Reflectance Scale, which measures the reflection of light off of a grade of paper. One is the lowest reflection, or what would be given to a totally black grade, and 100 is the brightest measured grade.
; weighing not more than 340 grams per square meter; whether gloss grade, satin grade, matte grade, dull grade, or any other grade of finish; whether or not surface-colored, surface-decorated, printed (except as described below), embossed, or perforated; and irrespective of dimensions (“Certain Coated Paper”).
Certain Coated Paper includes (a) coated free sheet paper and paperboard that meets this scope definition; (b) coated groundwood paper and paperboard produced from bleached chemi-thermo-mechanical pulp (“BCTMP”) that meets this scope definition; and (c) any other coated paper and paperboard that meets this scope definition.
Certain Coated Paper is typically (but not exclusively) used for printing multi-colored graphics for catalogues, books, magazines, envelopes, labels and wraps, greeting cards, and other commercial printing applications requiring high quality print graphics.
Specifically excluded from the scope are imports of paper and paperboard printed with final content printed text or graphics.
8528.12.2800, 8528.12.3250, 8528.12.3290, 8528.12.4000, 8528.12.5600, 8528.12.3600, 8528.12.4400, 8528.12.4800, 8528.12.5200
彩电
Color Television Receivers  For purposes of the order, the term ‘‘certain color television receivers’’ includes complete and incomplete direct–view or projection–type cathode–ray tube color television receivers, with a video display diagonal exceeding 52 centimeters, whether or not combined with video recording or reproducing apparatus, which are capable of receiving a broadcast television signal and producing a video image. Specifically excluded from the order are computer monitors or other video display devices that are not capable of receiving a broadcast television signal
4802.30; 4802.54; 4802.61; 4802.62; 4802.69; 4804.39; 4806.40; 4808.30; 4808.90; 4811.90; 4818.90; 4823.90; 9505.90.40.
皱纹纸产品
Crepe Paper Products  For purposes of this order, the term ``certain crepe paper'' includes crepe paper products that have a basis weight not exceeding 29 grams per square meter prior to being creped and, if appropriate, flame-proofed. Crepe paper has a finely wrinkled surface texture and typically but not exclusively is treated to be flame-retardant. Crepe paper is typically but not exclusively produced as streamers in roll form and packaged in plastic bags. Crepe paper may or may not be bleached, dye-colored, surface-colored, surface decorated or printed, glazed, sequined, embossed, die-cut, and/or flame-retardant. Subject crepe paper may be rolled, flat or folded, and may be packaged by banding or wrapping with paper, by placing in plastic bags, and/or by placing in boxes for distribution and use by the ultimate consumer. Packages of crepe paper subject to this order may consist solely of crepe paper of one color and/or style, or may contain multiple colors and/or styles.
8501.61.0000, 8507.20.80, 8541.40.6020, 8541.40.6030, 8501.31.8000
晶体硅太阳能电池,不论是否组装成模块
Crystalline Silicon Photovoltaic Cells, Whether Or Not Assembled Into Modules The merchandise covered by this order is crystalline silicon photovoltaic cells, and modules, laminates, and panels, consisting of crystalline silicon photovoltaic cells, whether or not partially or fully assembled into other products, including, but not limited to, modules, laminates, panels and building integrated materials.
This order covers crystalline silicon photovoltaic cells of thickness equal to or greater than 20 micrometers, having a p/n junction formed by any means, whether or not the cell has undergone other processing, including, but not limited to, cleaning, etching, coating, and/or addition of materials (including, but not limited to, metallization and conductor patterns) to collect and forward the electricity that is generated by the cell.
Merchandise under consideration may be described at the time of importation as parts for final finished products that are assembled after importation, including, but not limited to, modules, laminates, panels, building-integrated modules, building-integrated panels, or other finished goods kits. Such parts that otherwise meet the definition of merchandise under consideration are included in the scope of this order.
Excluded from the scope of this order are thin film photovoltaic products produced from amorphous silicon (a-Si), cadmium telluride (CdTe), or copper indium gallium selenide (CIGS).
Also excluded from the scope of this order are crystalline silicon photovoltaic cells, not exceeding 10,000mm2 in surface area, that are permanently integrated into a consumer good whose function is other than power generation and that consumes the electricity generated by the integrated crystalline silicon photovoltaic cell. Where more than one cell is permanently integrated into a consumer good, the surface area for purposes of this exclusion shall be the total combined surface area of all cells that are integrated into the consumer good.
Modules, laminates, and panels produced in a third-country from cells produced in the PRC are covered by this order; however, modules, laminates, and panels produced in the PRC from cells produced in a third-country are not covered by this order.
8501.61.0000, 8507.20.8030, 8507.20.8040, 8507.20.8060, 8507.20.8090, 8541.40.6020, 8541.40.6030 and 8501.31.8000 晶体硅太阳能产品 Crystalline Silicon Photovoltaic Products  The merchandise covered by this investigation is modules, laminates and/or panels consisting of crystalline silicon photovoltaic cells, whether or not partially or fully assembled into other products, including building integrated materials. For purposes of this investigation, subject merchandise includes modules, laminates and/or panels assembled in the PRC consisting of crystalline silicon photovoltaic cells produced in a customs territory other than the PRC.
Subject merchandise includes modules, laminates and/or panels assembled in the PRC consisting of crystalline silicon photovoltaic cells of thickness equal to or greater than 20 micrometers, having a p/n junction formed by any means, whether or not the cell has undergone other processing, including, but not limited to, cleaning, etching, coating, and/or addition of materials (including, but not limited to, metallization and conductor patterns) to collect and forward the electricity that is generated by the cell.
Excluded from the scope of this investigation are thin film photovoltaic products produced from amorphous silicon (a-Si), cadmium telluride (CdTe), or copper indium gallium selenide (CIGS). Also excluded from the scope of this investigation are modules, laminates and/or panels assembled in the PRC, consisting of crystalline silicon photovoltaic cells, not exceeding 10,000mm2 in surface area, that are permanently integrated into a consumer good whose function is other than power generation and that consumes the electricity generated by the integrated crystalline silicon photovoltaic cells. Where more than one module, laminate and/or panel is permanently integrated into a consumer good, the surface area for purposes of this exclusion shall be the total combined surface area of all modules, laminates and/or panels that are integrated into the consumer good. Further, also excluded from the scope of this investigation are any products covered by the existing antidumping and countervailing duty orders on crystalline silicon photovoltaic cells, whether or not assembled into modules, laminates and/or panels, from the PRC. See Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled Into Modules, From the People's Republic of China: Amended Final Determination of Sales at Less Than Fair Value, and Antidumping Duty Order, 77 FR 73018 (December 7, 2012); Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled Into Modules, From the People's Republic of China: Countervailing Duty Order, 77 FR 73017 (December 7, 2012). 
8206.00.00.00  6804.21.00.00
钻石锯片
Diamond Sawblades The products covered by the order are all finished circular sawblades, whether slotted or not, with a working part that is comprised of a diamond segment or segments, and parts thereof, regardless of specification or size, except as specifically excluded below. Within the scope of the order are semifinished diamond sawblades, including diamond sawblade cores and diamond sawblade segments. Diamond sawblade cores are circular steel plates, whether or not attached to non-steel plates, with slots. Diamond sawblade cores are manufactured principally, but not exclusively, from alloy steel. A diamond sawblade segment consists of a mixture of diamonds (whether natural or synthetic, and regardless of the quantity of diamonds) and metal powders (including, but not limited to, iron, cobalt, nickel, tungsten carbide) that are formed together into a solid shape (from generally, but not limited to, a heating and pressing process). Sawblades with diamonds directly attached to the core with a resin or electroplated bond, which thereby do not contain a diamond segment, are not included within the scope of the order. Diamond sawblades and/or sawblade cores with a thickness of less than 0.025 inches, or with a thickness greater than 1.1 inches, are excluded from the scope of the order. Circular steel plates that have a cutting edge of non-diamond material, such as external teeth that protrude from the outer diameter of the plate, whether or not finished, are excluded from the scope of the order. Diamond sawblade cores with a Rockwell C hardness of less than 25 are excluded from the scope of the order. Diamond sawblades and/or diamond segment(s) with diamonds that predominantly have a mesh size number greater than 240 (such as 250 or 260) are excluded from the scope of the order
7324.10.0000. 7324.10.00.10
不锈钢水槽
Drawn Stainless Steel Sinks The products covered by the scope of this order are drawn stainless steel sinks with single or multiple drawn bowls, with or without drain boards, whether finished or unfinished, regardless of type of finish, gauge, or grade of stainless steel. Mounting clips, fasteners, seals, and sound-deadening pads are also covered by the scope of this order if they are included within the sales price of the drawn stainless steel sinks.\1\ For purposes of this scope definition, the term ``drawn'' refers to a manufacturing process using metal forming technology to produce a smooth basin with seamless, smooth, and rounded corners. Drawn stainless steel sinks are available in various shapes and configurations and may be described in a number of ways including flush mount, top mount, or undermount (to indicate the attachment relative to the countertop). Stainless steel sinks with multiple drawn bowls that are joined through a welding operation to form one unit are covered by the scope of the order. Drawn stainless steel sinks are covered by the scope of the order whether or not they are sold in conjunction with non-subject accessories such as faucets (whether attached or unattached), strainers, strainer sets, rinsing baskets, bottom grids, or other accessories. \1\ Mounting clips, fasteners, seals, and sound-deadening pads are not covered by the scope of the order if they are not included within the sales price of the drawn stainless steel sinks, regardless of whether they are shipped with or entered with drawn stainless steel sinks.
---------------------------------------------------------------------------

Excluded from the scope of the order are stainless steel sinks with fabricated bowls. Fabricated bowls do not have seamless corners, but rather are made by notching and bending the stainless steel, and then welding and finishing the vertical corners to form the bowls. Stainless steel sinks with fabricated bowls may sometimes be referred to as ``zero radius'' or ``near zero radius'' sinks. 
7304.22.0030, 7304.22.0045, 7304.22.0060, 7304.23.3000, 7304.23.6030, 7304.23.6045, 7304.23.6060, 8431.43.8040 , 8431.43.8060, 8431.43.4000, 7304.39.0028, 7304.39.0032, 7304.39.0036, 7304.39.0040, 7304.39.0044, 7304.39.0048, 7304.39.0052, 7304.39.0056, 7304.49.0015, 7304.49.0060, 7304.59.8020, 7304.59.8025, 7304.59.8030, 7304.59.8035, 7304.59.8040, 7304.59.8045, 7304.59.8050,  7304.59.8055
钻杆
Drill Pipe The products covered by the investigation are steel drill pipe, and steel drill collars, whether or not conforming to American Petroleum Institute (“API”) or non-API specifications. Included are finished drill pipe and drill collars without regard to the specific chemistry of the steel (i.e., carbon, stainless steel, or other alloy steel), and without regard to length or outer diameter. Also included are unfinished drill collars (including all drill collar green tubes) and unfinished drill pipe (including drill pipe green tubes, which are tubes meeting the following description: seamless tubes with an outer diameter of less than or equal to 6 5/8 inches (168.28 millimeters), containing between 0.16 and 0.75 percent molybdenum, and containing between 0.75 and 1.45 percent chromium). The scope does not include tool joints not attached to the drill pipe, nor does it include unfinished tubes for casing or tubing covered by any other antidumping or countervailing duty order.
2820.10.00.00
电解二氧化锰
Electrolytic Manganese Dioxide The merchandise covered by this order includes all manganese dioxide (MnO[2]) that has been manufactured in an electrolysis process, whether in powder, chip, or plate form. Excluded from the scope are natural manganese dioxide (NMD) and chemical manganese dioxide (CMD
7202.92.00.
钒铁
Ferrovanadium The scope of this order covers all ferrovanadium regardless of grade,
chemistry, form, shape, or size. Ferrovanadium is an alloy of iron and
vanadium that is used chiefly as an additive in the manufacture of steel. The merchandise is commercially and
scientifically identified as vanadium
The scope specifically excludes
vanadium additives other than ferrovanadium, such as nitride vanadium,
vanadium-aluminum master alloys, vanadium chemicals, vanadium
oxides, vanadium waste and scrap, and vanadium-bearing raw materials such as
slag, boiler residues and fly ash
9403.20.0011 9403.90.8041
熨衣板
Floor-Standing, Metal-Top Ironing Tables And Parts Thereof For purposes of this order, the product covered consists of floor-standing, metal-top ironing tables, assembled or unassembled, complete or incomplete, and certain parts thereof. The subject tables are designed and used principally for the hand ironing or pressing of garments or other articles of fabric. The subject tables have full-height leg assemblies that support the ironing surface at an appropriate (often adjustable) height above the floor. The subject tables are produced in a variety of leg finishes, such as painted, plated, or matte, and they are available with various features, including iron rests, linen racks, and others. The subject ironing tables may be sold with or without a pad and/or cover. All types and configurations of floor-standing, metal-top ironing tables are covered by this order.

Furthermore, this order specifically covers imports of ironing tables, assembled or unassembled, complete or incomplete, and certain parts thereof. For purposes of this order, the term ``unassembled'' ironing table means a product requiring the attachment of the leg assembly to the top or the attachment of an included feature such as an iron rest or linen rack. The term ``complete'' ironing table means a product sold as a ready-to-use ensemble consisting of the metal-top table and a pad and cover, with or without additional features, e.g. iron rest or linen rack. The term ``incomplete'' ironing table means a product shipped or sold as a ``bare board''--i.e., a metal-top table only, without the pad and cover--with or without additional features, e.g. iron rest or linen rack. The major parts or components of ironing tables that are intended to be covered by this order under the term ``certain parts thereof'' consist of the metal top component (with or without assembled supports and slides) and/or the leg components, whether or not attached together as a leg assembly. The order covers separately shipped metal top components and leg components, without regard to whether the respective quantities would yield an exact quantity of assembled ironing tables.
Ironing tables without legs (such as models that mount on walls or over doors) are not floor-standing and are specifically excluded. Additionally, tabletop or counter top models with short legs that do not exceed 12 inches in length (and which may or may not collapse or retract) are specifically excluded.
9403.90.8041
金属顶和腿组件
metal top and leg components 
4819.20.0040  4819.50.4060
折叠礼品盒
Folding Gift Boxes  The products covered by the order are certain folding gift boxes. Folding gift boxes are a type of folding or knock-down carton manufactured from paper or paperboard. Folding gift boxes are produced from a variety of recycled and virgin paper or paperboard materials, including, but not limited to, clay-coated paper or paperboard and kraft (bleached or unbleached) paper or paperboard. The scope of the order excludes gift boxes manufactured from paper or paperboard of a thickness of more than 0.8 millimeters, corrugated paperboard, or paper mache. The scope of the order also excludes those gift boxes for which no side of the box, when assembled, is at least nine inches in length.

Folding gift boxes included in the scope of the order are typically decorated with a holiday motif using various processes, including printing, embossing, debossing, and foil stamping, but may also be plain white or printed with a single color. The subject merchandise includes folding gift boxes, with or without handles, whether finished or unfinished, and whether in one-piece or multi-piece configuration. One-piece gift boxes are die-cut or otherwise formed so that the top, bottom, and sides form a single, contiguous unit. Two-piece gift boxes are those with a folded bottom and a folded top as separate pieces. Folding gift boxes are generally packaged in shrink-wrap, cellophane, or other packaging materials, in single or multi-box packs for sale to the retail customer
The scope of the order excludes folding gift boxes that have a retailer's name, logo, trademark or similar company information printed prominently on the box's top exterior (such folding gift boxes are often known as “not-for-resale” gift boxes or “give-away” gift boxes and may be provided by department and specialty stores at no charge to their retail customers). The scope of the order also excludes folding gift boxes where both the outside of the box is a single color and the box is not packaged in shrink-wrap, cellophane, other resin-based packaging films, or paperboard.
9401710010, 9401710030, 9401790045, 9401790050, 9403200010  9403200030
折叠金属桌椅
Folding Metal Tables And Chairs The merchandise subject to this order consists of assembled and unassembled folding tables and folding chairs made primarily or exclusively from steel or other metal, as described below:

1) Assembled and unassembled folding tables made primarily or exclusively from steel or other metal (“folding metal tables”). Folding metal tables include square, round, rectangular, and any other shapes with legs affixed with rivets, welds, or any other type of fastener, and which are made most commonly, but not exclusively, with a hardboard top covered with vinyl or fabric. Folding metal tables have legs that mechanically fold independently of one another, and not as a set. The subject merchandise is commonly, but not exclusively, packed singly, in multiple packs of the same item, or in five piece sets consisting of four chairs and one table. Specifically excluded from the scope of folding metal tables are the following:
Lawn furniture;
Trays commonly referred to as “TV trays”;
Side tables;
Child-sized tables;
Portable counter sets consisting of rectangular tables 36''
high and matching stools; and
Banquet tables. A banquet table is a rectangular table with a plastic or laminated wood table top approximately 28'' to 36'' wide by 48'' to 96'' long and with a set of folding legs at each end of the
table. One set of legs is composed of two individual legs that are affixed together by one or more cross-braces using welds or fastening hardware. In contrast, folding metal tables have legs that mechanically fold independently of one another, and not as a set.

2) Assembled and unassembled folding chairs made primarily or exclusively from steel or other metal (“folding metal chairs”). Folding metal chairs include chairs with one or more cross-braces, regardless of shape or size, affixed to the front and/or rear legs with rivets, welds or any other type of fastener. Folding metal chairs include: those that are made solely of steel or other metal; those that have a back pad, a seat pad, or both a back pad and a seat pad; and
those that have seats or backs made of plastic or other materials. The subject merchandise is commonly, but not exclusively, packed singly, in multiple packs of the same item, or in five piece sets consisting of four chairs and one table. Specifically excluded from the scope of folding metal chairs are the following:
Folding metal chairs with a wooden back or seat, or both;
Lawn furniture;
Stools;
Chairs with arms; and
Child-sized chairs.
2704.00.00.10  2704.00.00.11
铸造用焦炭
Foundry Coke The product covered under the antidumping duty order is coke larger than 100 mm (4 inches) in maximum diameter and at least 50 percent of which is retained on a 100 mm (4 inch) sieve, of a kind used in foundries
1605.40.1010  1605.40.1090,  0306.19.0010  0306.29.0000
淡水小龙虾
Freshwater Crawfish Tailmeat The product covered by the antidumping duty order is freshwater crawfish tail meat, in all its forms (whether washed or with fat on, whether purged or un-purged), grades, and sizes; whether frozen, fresh, or chilled; and regardless of how it is packed, preserved, or prepared Excluded from the scope of the order are live crawfish and other whole crawfish, whether boiled, frozen, fresh, or chilled. Also excluded are saltwater crawfish of any type, and parts thereof. 
0306.13.0003, 0306.13.0006, 0306.13.0009, 0306.13.0012, 0306.13.0015, 0306.13.0018, 0306.13.0021, 0306.13.0024, 0306.13.0027, 0306.13.0040, 0306.17.0003, 0306.17.0006, 0306.17.0009, 0306.17.0012, 0306.17.0015, 0306.17.0018, 0306.17.0021, 0306.17.0024, 0306.17.0027, 0306.17.0040, 1605.20.1010, 1605.20.1030, 1605.21.1030,  1605.29.1010.
冷冻温水虾
Frozen Warmwater Shrimp The scope of the order includes certain warmwater shrimp and prawns, whether frozen, wild-caught (ocean harvested) or farm-raised (produced by aquaculture), head-on or head-off, shell-on or peeled, tail-on or tail-off, “Tails” in this context means the tail fan, which includes the telson and the uropods. deveined or not deveined, cooked or raw, or otherwise processed in frozen form. The frozen warmwater shrimp and prawn products included in the scope of the order, regardless of definitions in the Harmonized Tariff Schedule of the United States (“HTS”), are products which are processed from warmwater shrimp and prawns through freezing and which are sold in any count size.

The products described above may be processed from any species of warmwater shrimp and prawns. Warmwater shrimp and prawns are generally classified in, but are not limited to, the Penaeidae family. Some examples of the farmed and wild-caught warmwater species include, but are not limited to, whiteleg shrimp (Penaeus vannemei), banana prawn (Penaeus merguiensis), fleshy prawn (Penaeus chinensis), giant river prawn (Macrobrachium rosenbergii), giant tiger prawn (Penaeus monodon), redspotted shrimp (Penaeus brasiliensis), southern brown shrimp (Penaeus subtilis), southern pink shrimp (Penaeus notialis), southern rough shrimp (Trachypenaeus curvirostris), southern white shrimp (Penaeus schmitti), blue shrimp (Penaeus stylirostris), western white shrimp (Penaeus occidentalis), and Indian white prawn (Penaeus indicus).

Frozen shrimp and prawns that are packed with marinade, spices or sauce are included in the scope of the order. In addition, food preparations (including dusted shrimp), which are not “prepared meals,” that contain more than 20 percent by weight of shrimp or prawn are also included in the scope of the order.

Excluded from the scope are: 1) breaded shrimp and prawns (HTS subheading 1605.20.10.20); 2) shrimp and prawns generally classified in the Pandalidae family and commonly referred to as coldwater shrimp, in any state of processing; 3) fresh shrimp and prawns whether shell-on or peeled (HTS subheadings 0306.23.00.20 and 0306.23.00.40); 4) shrimp and prawns in prepared meals (HTS subheading 1605.20.05.10); 5) dried shrimp and prawns; 6) Lee Kum Kee’s shrimp sauce; 7) canned warmwater shrimp and prawns (HTS subheading 1605.20.10.40); and 8) certain battered shrimp. Battered shrimp is a shrimp-based product: 1) that is produced from fresh (or thawed-from-frozen) and peeled shrimp; 2) to which a “dusting” layer of rice or wheat flour of at least 95 percent purity has been applied; 3) with the entire surface of the shrimp flesh thoroughly and evenly coated with the flour; 4) with the non-shrimp content of the end product constituting between four and 10 percent of the product’s total weight after being dusted, but prior to being frozen; and 5) that is subjected to individually quick frozen (“IQF”) freezing immediately after application of the dusting layer. When dusted in accordance with the definition of dusting above, the battered shrimp product is also coated with a wet viscous layer containing egg and/or milk, and par-fried.
Excluded from the scope are: 1) breaded shrimp and prawns (HTS subheading 1605.20.10.20); 2) shrimp and prawns generally classified in the Pandalidae family and commonly referred to as coldwater shrimp, in any state of processing; 3) fresh shrimp and prawns whether shell-on or peeled (HTS subheadings 0306.23.00.20 and 0306.23.00.40); 4) shrimp and prawns in prepared meals (HTS subheading 1605.20.05.10); 5) dried shrimp and prawns; 6) Lee Kum Kee’s shrimp sauce; 7) canned warmwater shrimp and prawns (HTS subheading 1605.20.10.40); and 8) certain battered shrimp. Battered shrimp is a shrimp-based product: 1) that is produced from fresh (or thawed-from-frozen) and peeled shrimp; 2) to which a “dusting” layer of rice or wheat flour of at least 95 percent purity has been applied; 3) with the entire surface of the shrimp flesh thoroughly and evenly coated with the flour; 4) with the non-shrimp content of the end product constituting between four and 10 percent of the product’s total weight after being dusted, but prior to being frozen; and 5) that is subjected to individually quick frozen (“IQF”) freezing immediately after application of the dusting layer. When dusted in accordance with the definition of dusting above, the battered shrimp product is also coated with a wet viscous layer containing egg and/or milk, and par-fried.
2932.13.00
糠醇,呋喃甲醇
Furfuryl Alcohol  The merchandise covered by this order is furfuryl alcohol
(C<INF>4</INF>H<INF>3</INF>OCH<INF>2</INF>OH). Furfuryl alcohol is a
primary alcohol, and is colorless or pale yellow in appearance. It is used in the manufacture of resins and as a wetting agent and solvent for coating resins, nitrocellulose, cellulose acetate, and other soluble dyes.
0703.20.0010, 0703.20.0020, 0703.20.0090
新鲜大蒜
Garlic, Fresh The products subject t0o this antidumping duty order are all grades of garlic, whole or separated into constituent cloves, whether or not peeled, fresh, chilled, frozen, provisionally preserved, or packed in water or other neutral substance, but not prepared or preserved by the addition of other ingredients or heat processing. The differences between grades are based on color, size, sheathing and level of decay. The scope of this order does not include: (a) Garlic that has been mechanically harvested and that is primarily, but not exclusively, destined for non-fresh use; or (b) garlic that has been specially prepared and cultivated prior to planting and then harvested and otherwise prepared for use as seed.
2922.49.4020
甘氨酸; 糖胶,氨基乙酸
GlycineThe product covered by this order is glycine, which is a free-flowing crystalline material, like salt or sugar. Glycine is produced at varying levels of purity and is used as a sweetener/taste enhancer, a buffering agent, re-absorbable amino acid, chemical intermediate, and a metal complexing agent. 
52.10.11.60
格雷格涤棉印花布进口
Greig Polyester Cotton Print Cloth Imports covered by this order are shipments of greige polyester/cotton printcloth, other than 80 x 80 type. Greige polyester/cotton printcloth is unbleached and uncolored printcloth. The term “printcloth” refers to plain woven fabric, not napped, not fancy or figured, of single yarn, not combed, of average yarn number 26 to 40, weighing not more than 6 ounces per square yard, of a total count of more than 85 yarns per square inch, of which the total count of the warp yarns per inch and the total count of the filling yarns per inch are each less than 62 percent of the total count of the warp and filling yarns per square inch.
8716.80.50.10 8716.80.50.90
手推车; 小推车
Hand Trucks The merchandise subject to this antidumping duty order consists of hand trucks manufactured from any material, whether assembled or unassembled, complete or incomplete, suitable for any use, and certain parts thereof, namely the vertical frame, the handling area and the projecting edges or toe plate, and any combination thereof.

A complete or fully assembled hand truck is a hand-propelled barrow consisting of a vertically disposed frame having a handle or more than one handle at or near the upper section of the vertical frame; at least two wheels at or near the lower section of the vertical frame; and a horizontal projecting edge or edges, or toe plate, perpendicular or angled to the vertical frame, at or near the lower section of the vertical frame. The projecting edge or edges, or toe plate, slides under a load for purposes of lifting and/or moving the load.

That the vertical frame can be converted from a vertical setting to a horizontal setting, then operated in that horizontal setting as a platform, is not a basis for exclusion of the hand truck from the scope of this petition. That the vertical frame, handling area, wheels, projecting edges or other parts of the hand truck can be collapsed or folded is not a basis for exclusion of the hand truck from the scope of the petition. That other wheels may be connected to the vertical frame, handling area, projecting edges, or other parts of the hand truck, in addition to the two or more wheels located at or near the lower section of the vertical frame, is not a basis for exclusion of the hand truck from the scope of the petition. Finally, that the hand truck may exhibit physical characteristics in addition to the vertical frame, the handling area, the projecting edges or toe plate, and the two wheels at or near the lower section of the vertical frame, is not a basis for exclusion of the hand truck from the scope of the petition. 
8716.90.50.60
手推车的框架
Specific parts of a hand truck, namely the vertical frame, the handling area and the projecting edges or toe plate, or any combination thereof,
8205.20.60, 8205.59.30, 8201.30.00  8201.40.60.
重锻造手动工具
Heavy Forged Hand Tools, With Or Without Handles The products covered by these orders are HFHTs from the PRC, comprising the following classes or kinds of merchandise: (1) hammers and sledges with heads over 1.5 kg (3.33 pounds); (2) bars over 18 inches in length, track tools and wedges; (3) picks and mattocks; and (4) axes, adzes and similar hewing tools. HFHTs include heads for drilling hammers, sledges, axes, mauls, picks and mattocks, which may or may not be painted, which may or may not be finished, or which may or may not be imported with handles; assorted bar products and track tools including wrecking bars, digging bars and tampers; and steel wood splitting wedges. HFHTs are manufactured through a hot forge operation in which steel is sheared to required length, heated to forging temperature, and formed to final shape on forging equipment using dies specific to the desired product shape and size. Depending on the product, finishing operations may include shot blasting, grinding, polishing and painting, and the insertion of handles for handled products Specifically excluded from these investigations are hammers and sledges with heads 1.5 kg. (3.33 pounds) in weight and under, hoes and rakes, and bars 18 inches in length and under. The HTSUS subheadings are provided for convenience and Customs purposes. The written description remains dispositive. 
7318.21.0000  7318.21.0030
螺旋弹簧锁清洗器
Helical Spring Lock Washers The products covered by the order are HSLWs of carbon steel, of carbon alloy steel, or of stainless steel, heat-treated or non-heat-treated, plated or non-plated, with ends that are off-line. HSLWs are designed to: (1) Function as a spring to compensate for developed looseness between the component parts of a fastened assembly; (2) distribute the load over a larger area for screws or bolts; and (3) provide a hardened bearing surface. The scope does not include internal or external tooth washers, nor does it include spring lock washers made of other metals, such as copper. The scope does not include internal or external tooth washers, nor does it include spring lock washers made of other metals, such as copper.
7311.00.00.30.  7311.00.00.60  7311.00.00.90
钢制高压气瓶
High Pressure Steel Cylinders The merchandise covered by the order is seamless steel cylinders designed for storage or transport of compressed or liquefied gas (“high pressure steel cylinders”). High pressure steel cylinders are fabricated of chrome alloy steel including, but not limited to, chromium-molybdenum steel or chromium magnesium steel, and have permanently impressed into the steel, either before or after importation, the symbol of a U.S. Department of Transportation, Pipeline and Hazardous Materials Safety Administration (“DOT”) approved high pressure steel cylinder manufacturer, as well as an approved DOT type marking of DOT 3A, 3AX, 3AA, 3AAX, 3B, 3E, 3HT, 3T, or DOT-E (followed by a specific exemption number) in accordance with the requirements of sections 178.36 through 178.68 of Title 49 of the Code of Federal Regulations, or any subsequent amendments thereof. High pressure steel cylinders covered by the investigation have a water capacity up to 450 liters, and a gas capacity ranging from 8 to 702 cubic feet, regardless of corresponding service pressure levels and regardless of physical dimensions, finish or coatings. Excluded from the scope of the order are high pressure steel cylinders manufactured to UN-ISO-9809-1 and 2 specifications and permanently impressed with ISO or UN symbols. Also excluded from the investigation are acetylene cylinders, with or without internal porous mass, and permanently impressed with 8A or 8AL in accordance with DOT regulations.
0409.00.00, 1702.90.90, 2106.90.99, 0409.00.0010, 0409.00.0035, 0409.00.0005, 0409.00.0045, 0409.00.0056, 0409.00.0065
蜂蜜
Honey   The products covered by the order are natural honey, artificial honey containing more than 50 percent natural honey by weight, preparations of natural honey containing more than 50 percent natural honey by weight and flavored honey. The subject merchandise includes all grades and colors of honey whether in liquid, creamed, comb, cut comb, or chunk form, and whether packaged for retail or in bulk form
7325.10.0010  7325.10.0050
铁结构铸
Iron Construction Castings The products covered by this investigation are certain iron construction castings. limited to manhole covers, rings and frames, catch basin grates and frames, cleanout covers and drains used for drainage or access purposes for public utilities, water and sanitary systems; and valve, service, and meter boxes which are placed below ground to encase water, gas, or other valves , or water or gas meters. These articles must be of cast iron, not alloyed, and not malleable. 
8418.99.8050, 8418.99.8060, 7321.90.5000, 7321.90.6090, 8516.90.8000, 8516.90.8010, 7321.90.6040, 8419.90.9520
厨房电器的货架和货架
Kitchen Appliance Shelving And Racks The scope of this order consists of shelving and racks for refrigerators, freezers, combined refrigerator-freezers, other refrigerating or freezing equipment, cooking stoves, ranges, and ovens (“certain kitchen appliance shelving and racks” or “the merchandise under order”). Certain kitchen appliance shelving and racks are defined as shelving, baskets, racks (with or without extension slides, which are carbon or stainless steel hardware devices that are connected to shelving, baskets, or racks to enable sliding), side racks (which are welded wire support structures for oven racks that attach to the interior walls of an oven cavity that does not include support ribs as a design feature), and subframes (which are welded wire support structures that interface with formed support ribs inside an oven cavity to support oven rack assemblies utilizing extension slides) with the following dimensions:
-- shelving and racks with dimensions ranging from 3 inches by 5 inches by 0.10 inch to 28 inches by 34 inches by 6 inches; or
-- baskets with dimensions ranging from 2 inches by 4 inches by 3 inches to 28 inches by 34 inches by 16 inches; or
--side racks from 6 inches by 8 inches by 0.1 inch to 16 inches by 30 inches by 4 inches; or
--subframes from 6 inches by 10 inches by 0.1 inch to 28 inches by 34 inches by 6 inches.
The merchandise under this order is comprised of carbon or stainless steel wire ranging in thickness from 0.050 inch to 0.500 inch and may include sheet metal of either carbon or stainless steel ranging in thickness from 0.020 inch to 0.2 inch. The merchandise under this order may be coated or uncoated and may be formed and/or welded. 
Excluded from the scope of this order is shelving in which the support surface is glass.
6305.33.0050  6305.33.0080.  6305.33.0020
叠层编织袋
Laminated Woven Sacks The merchandise covered by the order is laminated woven sacks. Laminated woven sacks are bags or sacks consisting of one or more plies of fabric consisting of woven polypropylene strip and/or woven polyethylene strip, regardless of the width of the strip; with or without an extrusion coating of polypropylene and/or polyethylene on one or both sides of the fabric; laminated by any method either to an exterior ply of plastic film such as biaxially-oriented polypropylene (“BOPP”) or to an exterior ply of paper that is suitable for high quality print graphics; “Paper suitable for high quality print graphics,” as used herein, means paper having an ISO brightness of 82 or higher and a Sheffield Smoothness of 250 or less. Coated free sheet is an example of a paper suitable for high quality print graphics. printed with three colors or more in register; with or without lining; whether or not closed on one end; whether or not in roll form (including sheets, lay-flat tubing, and sleeves); with or without handles; with or without special closing features; not exceeding one kilogram in weight. Laminated woven sacks are typically used for retail packaging of consumer goods such as pet foods and bird seed. 
3923.21.0080, 3923.21.0095,  3923.29.0000.
叠层编织袋
Laminated Woven Sacks If entered with plastic coating on both sides of the fabric consisting of woven polypropylene strip and/or woven polyethylene strip, laminated woven sacks may be classifiable under HTSUS subheadings
3917.39.0050, 3921.90.1100, 3921.90.1500,  5903.90.2500
叠层编织袋
Laminated Woven Sacks If entered not closed on one end or in roll form (including sheets, lay-flat tubing, and sleeves), laminated woven sacks may be classifiable under other HTSUS subheadings including
4601.99.0500, 4601.99.9000,  4602.90.0000
叠层编织袋
Laminated Woven Sacks If the polypropylene strips and/or polyethylene strips making up the fabric measure more than 5 millimeters in width, laminated woven sacks may be classifiable under other HTSUS subheadings including
7308.90.3000, 7308.90.6000 7326.90.85.35.
草坪和花园钢栅栏柱
Lawn And Garden Steel Fence Posts For purposes of this order, the products covered consist of all ``U'' shaped or ``hat'' shaped lawn and garden fence posts made of steel and/or any other metal, weighing 1 pound or less per foot, and produced in the PRC. The fence posts included within the scope of this order weigh up to 1 pound per foot and are made of steel and/or any other metal. Imports of these products are classified under the following categories: fence posts, studded with corrugations, knobs, studs, notches or similar protrusions with or without anchor posts and exclude round or square tubing or pipes.

These posts are normally made in two different classes, light and heavy duty. Light duty lawn and garden fence posts are normally made of 14 gauge steel (0.068 inches - 0.082 inches thick), 1.75 inches wide, in 3, 4, 5, or 6 foot lengths. These posts normally weigh approximately 0.45 pounds per foot and are packaged in mini-bundles of 10 posts and master bundles of 400 posts. Heavy duty lawn and garden steel fence posts are normally made of 13 gauge steel (0.082 inches - 0.095 inches thick), 3 inches wide, in 5, 6, 7, and 8 foot lengths. Heavy duty posts normally weigh approximately 0.90 pounds per foot and are packaged in mini-bundles of 5 and master bundles of 200. Both light duty and heavy duty posts are included within the scope of the order.
7306.61.50.00 7306.61.70.60
薄壁矩形钢管
Light-Walled Rectangular Pipe And Tube The merchandise that is the subject of this investigation is certain welded carbon-quality light-walled steel pipe and tube, of rectangular (including square) cross section, having a wall thickness of less than 4 mm.
The term carbon-quality steel includes both carbon steel and alloy steel which contains only small amounts of alloying elements. Specifically, the term carbon-quality includes products in which none of the elements listed below exceeds the quantity by weight respectively indicated: 1.80 percent of manganese, or 2.25 percent of silicon, or 1.00 percent of copper, or 0.50 percent of aluminum, or 1.25 percent of chromium, or 0.30 percent of cobalt, or 0.40 percent of lead, or 1.25 percent of nickel, or 0.30 percent of tungsten, or 0.10 percent of molybdenum, or 0.10 percent of niobium, or 0.15 percent vanadium, or 0.15 percent of zirconium. The description of carbon-quality is intended to identify carbon-quality products within the scope
3703.10.60, 4811.59.20, 4811.90.8040, 4811.90.9090, 4820.10.20,  4823.40.00.5
低克重热敏纸
Lightweight Thermal Paper The merchandise covered by these orders includes certain lightweight thermal paper, which is thermal paper with a basis weight of 70 grams per square meter (g/m2) (with a tolerance of ±4.0 g/m2) or less; irrespective of dimensions;1 with or without a base coat 2 on one or both sides; with thermal active coating(s)3 on one or both sides that is a mixture of the dye and the developer that react and form an image when heat is applied; with or without a top coat;4 and without an adhesive backing. Certain lightweight thermal paper is typically (but not exclusively) used in point-of-sale applications such as ATM receipts, credit card receipts, gas pump receipts, and retail store receipts
3703.10.60, 4811.59.20, 4811.90.8000, 4811.90.8030, 4811.90.8040, 4811.90.8050, 4811.90.9000, 4811.90.9030, 4811.90.9035,
4811.90.9050, 4811.90.9080, 4811.90.9090, 4820.10.20,  4823.40.00
低克重热敏纸
Lightweight Thermal PaperThe scope of the order includes certain lightweir,ht thermal paper, which is thermal paper with a basis weight of70 grams per square meter (g/m) (with a tolerance of± 4.0 g/m2 ) or less; irrespective of dimensions; 1 with or without a base coat2 on one or both sides; with thermal active coating(s)3 on one or both sides that is a mixture of the dye and the developer that react and form an image when heat is applied; with or without a top coat;4 and without an adhesive backing. Certain LWTP is typically (but not exclusively) used in point-of-sale applications such as ATM receipts, credit card receipts, gas pump receipts, and retail store receipts.  
4811.90.8020 (for gift wrap, a non-subject product) and 4811.90.8040 (for “other” including LWTP).
低克重热敏纸
Lightweight Thermal Paper fns -
1 L WTP is typically produced in jumbo rolls that are slit to the specifications of the converting equipment and then converted into finished slit rolls. Both jumbo and converted rolls (as well as L WTP in any other form, presentation, or dimension) are covered by the scope of the order.
2 A base coat, when applied, is typically made of clay and/or latex and like materials and is intended to cover the rough surface of the paper substrate and to provide insulating value.
3 A thermal active coating is typically made of sensitizer, dye, and co-reactant.
4 A top coat, when applied, is typically made of polyvinyl acetone, polyvinyl alcohol, and/or like materials and is intended to provide environmental protection, an improved surface for press printing, and/or wear protection for the thermal print head. 
4810.22.5044, 4811.90.9090, 4820.10.2010, 4820.10.2020, 4820.10.2050, 4820.10.4000
有横格的纸产品
Lined Paper Products The scope of this order includes certain lined paper products, typically school supplies,1 1For purposes of this scope definition, the actual use or labeling of these products as school supplies or non-school supplies is not a defining characteristic. composed of or including paper that incorporates straight horizontal and/or vertical lines on ten or more paper sheets,2 2There shall be no minimum page requirement for looseleaf filler paper. including but not limited to such products as single- and multi-subject notebooks, composition books, wireless notebooks, looseleaf or glued filler paper, graph paper, and laboratory notebooks, and with the smaller dimension of the paper measuring 6 inches to 15 inches (inclusive) and the larger dimension of the paper measuring 8-3/4 inches to 15 inches (inclusive). Page dimensions are measured size (not advertised, stated, or “tear-out” size), and are measured as they appear in the product (i.e., stitched and folded pages in a notebook are measured by the size of the page as it appears in the notebook page, not the size of the unfolded paper). However, for measurement purposes, pages with tapered or rounded edges shall be measured at their longest and widest points. Subject lined paper products may be loose, packaged or bound using any binding method (other than case bound through the inclusion of binders board, a spine strip, and cover wrap). Subject merchandise may or may not contain any combination of a front cover, a rear cover, and/or backing of any composition, regardless of the inclusion of images or graphics on the cover, backing, or paper. Subject merchandise is within the scope of this order whether or not the lined paper and/or cover are hole punched, drilled, perforated, and/or reinforced. Subject merchandise may contain accessory or informational items including but not limited to pockets, tabs, dividers, closure devices, index cards, stencils, protractors, writing implements, reference materials such as mathematical tables, or printed items such as sticker sheets or miniature calendars, if such items are physically incorporated, included with, or attached to the product, cover and/or backing thereto. Specifically excluded from the scope of this order are:
• unlined copy machine paper;
• writing pads with a backing (including but not limited to products commonly known as “tablets,” “note pads,” “legal pads,” and “quadrille pads”), provided that they do not have a front cover (whether permanent or removable). This exclusion does not apply to such writing pads if they consist of hole-punched or drilled filler paper;
• three-ring or multiple-ring binders, or notebook organizers incorporating such a ring binder provided that they do not include subject paper;
• index cards;
• printed books and other books that are case bound through the inclusion of binders board, a spine strip, and cover wrap;
• newspapers;
• pictures and photographs;
• desk and wall calendars and organizers (including but not limited to such products generally known as “office planners,” “time books,” and “appointment books”);
• telephone logs;
• address books;
• columnar pads & tablets, with or without covers, primarily suited for the recording of written numerical business data;
• lined business or office forms, including but not limited to: preprinted business forms, lined invoice pads and paper, mailing and address labels, manifests, and shipping log books;
• lined continuous computer paper;
• boxed or packaged writing stationary (including but not limited to products commonly known as “fine business paper,” “parchment paper,” and “letterhead”), whether or not containing a lined header or decorative lines;
• Stenographic pads (“steno pads”), Gregg ruled,3 3“Gregg ruling” consists of a single- or double-margin vertical ruling line down the center of the page. For a six-inch by nine-inch stenographic pad, the ruling would be located approximately three inches from the left of the book. measuring 6 inches by 9 inches;

Also excluded from the scope of this order are the following trademarked products:

• Fly™ lined paper products: A notebook, notebook organizer, loose or glued note paper, with papers that are printed with infrared reflective inks and readable only by a Fly™ pen-top computer. The product must bear the valid trademark Fly™.4 4Products found to be bearing an invalidly licensed or used trademark are not excluded from the scope.
• Zwipes™: A notebook or notebook organizer made with a blended polyolefin writing surface as the cover and pocket surfaces of the notebook, suitable for writing using a specially-developed permanent marker and erase system (known as a Zwipes™ pen). This system allows the marker portion to mark the writing surface with a permanent ink. The eraser portion of the marker dispenses a solvent capable of solubilizing the permanent ink allowing the ink to be removed. The product must bear the valid trademark Zwipes™.5 5Products found to be bearing an invalidly licensed or used trademark are not excluded from the scope.
• FiveStar®Advance™: A notebook or notebook organizer bound by a continuous spiral, or helical, wire and with plastic front and rear covers made of a blended polyolefin plastic material joined by 300 denier polyester, coated on the backside with PVC (poly vinyl chloride) coating, and extending the entire length of the spiral or helical wire. The polyolefin plastic covers are of specific thickness; front cover is .019 inches (within normal manufacturing tolerances) and rear cover is .028 inches (within normal manufacturing tolerances). Integral with the stitching that attaches the polyester spine covering, is captured both ends of a 1 inch wide elastic fabric band. This band is located 2-3/8 inches from the top of the front plastic cover and provides pen or pencil storage. Both ends of the spiral wire are cut and then bent backwards to overlap with the previous coil but specifically outside the coil diameter but inside the polyester covering. During construction, the polyester covering is sewn to the front and rear covers face to face (outside to outside) so that when the book is closed, the stitching is concealed from the outside. Both free ends (the ends not sewn to the cover and back) are stitched with a turned edge construction. The flexible polyester material forms a covering over the spiral wire to protect it and provide a comfortable grip on the product. The product must bear the valid trademarks FiveStar®Advance™.6 6Products found to be bearing an invalidly licensed or used trademark are not excluded from the scope.
• FiveStar Flex™: A notebook, a notebook organizer, or binder with plastic polyolefin front and rear covers joined by 300 denier polyester spine cover extending the entire length of the spine and bound by a 3-ring plastic fixture. The polyolefin plastic covers are of a specific thickness; front cover is .019 inches (within normal manufacturing tolerances) and rear cover is .028 inches (within normal manufacturing tolerances). During construction, the polyester covering is sewn to the front cover face to face (outside to outside) so that when the book is closed, the stitching is concealed from the outside. During construction, the polyester cover is sewn to the back cover with the outside of the polyester spine cover to the inside back cover. Both free ends (the ends not sewn to the cover and back) are stitched with a turned edge construction. Each ring within the fixture is comprised of a flexible strap portion that snaps into a stationary post which forms a closed binding ring. The ring fixture is riveted with six metal rivets and sewn to the back plastic cover and is specifically positioned on the outside back cover. The product must bear the valid trademark FiveStar Flex™.7 7Products found to be bearing an invalidly licensed or used trademark are not excluded from the scope. 
6902.10.1000, 6902.10.5000, 6815.91.0000, 6815.99.2000 6815.99.4000  6810.11.0000, 6810.91.0000, 6810.99.0080
镁碳砖
Magnesia Carbon Bricks The scope of the order includes certain chemically-bonded (resin or pitch), magnesia carbon bricks with a magnesia component of at least 70 percent magnesia (“MgO”) by weight, regardless of the source of raw materials for the MgO, with carbon levels ranging from trace amounts to 30 percent by weight, regardless of enhancements (for example, magnesia carbon bricks can be enhanced with coating, grinding, tar impregnation or coking, high temperature heat treatments, anti-slip treatments or metal casing) and regardless of whether or not antioxidants are present (for example, antioxidants can be added to the mix from trace amounts to 15 percent by weight as various metals, metal alloys, and metal carbides).
8104.19.00 8104.30.00
金属镁
Magnesium Metal  The merchandise covered by the order is magnesium metal, which includes primary and secondary alloy magnesium metal, regardless of chemistry, raw material source, form, shape, or size. Magnesium is a metal or alloy containing by weight primarily the element magnesium. Primary magnesium is produced by decomposing raw materials into magnesium metal. Secondary magnesium is produced by recycling magnesium-based scrap into magnesium metal. The magnesium covered by this investigation includes blends of primary and secondary magnesium.

The subject merchandise includes the following alloy magnesium metal products made from primary and/or secondary magnesium including, without limitation, magnesium cast into ingots, slabs, rounds, billets, and other shapes, magnesium ground, chipped, crushed, or machined into raspings, granules, turnings, chips, powder, briquettes, and other shapes: Products that contain 50 percent or greater, but less than 99.8 percent, magnesium, by weight, and that have been entered into the United States as conforming to an ‘‘ASTM Specification for Magnesium Alloy’’ 1 and thus are outside the scope of the existing antidumping orders on magnesium from the PRC (generally referred to as ‘‘alloy’’ magnesium).
The scope of the order excludes the following merchandise: (1) All forms of pure magnesium, including chemical combinations of magnesium and other material(s) in which the pure magnesium content is 50 percent or greater, but less than 99.8 percent, by weight, that do not conform to an ‘‘ASTM Specification for Magnesium Alloy;’’ 2 (2) magnesium that is in liquid or molten form; and (3) mixtures containing 90 percent or less magnesium in granular or powder form, by weight, and one or more of certain non-magnesium granular materials to make magnesium-based reagent mixtures, including lime, calcium metal, calcium silicon, calcium carbide, calcium carbonate, carbon, slag coagulants, fluorspar, nephaline syenite, feldspar, alumina (Al203), calcium aluminate, soda ash, hydrocarbons, graphite, coke, silicon, rare earth metals/mischmetal, cryolite, silica/fly ash, magnesium oxide, periclase, ferroalloys, dolomite lime, and colemanite.3 {fn 3 - This third exclusion for magnesium-based reagent mixtures is based on the exclusion for reagent mixtures in the 2000–2001 investigations of magnesium from the PRC, Israel, and Russia. See Final Determination of Sales at Less Than Fair Value: Pure Magnesium in Granular Form From the People’s Republic of China, 66 FR 49345 (September 27, 2001); Final Determination of Sales at Less Than Fair Value: Pure Magnesium From Israel, 66 FR 49349 (September 27, 2001); Final Determination of Sales at Not Less Than Fair Value: Pure Magnesium From the Russian Federation, 66 FR 49347 (September 27, 2001). These mixtures are not magnesium alloys because they are not chemically combined in liquid form and cast into the same ingot.}
7307.19.90.30, 7307.19.90.60 7307.19.90.80
可锻铸铁管路连接件
Malleable Cast Iron Pipe Fittings For purposes of this order, the products covered are certain malleable iron pipe fittings, cast, other than grooved fittings Excluded from the scope of this order are metal compression couplings,  A metal compression coupling consists of a coupling body, two gaskets, and two compression nuts. These products range in diameter from ½ inch to 2 inches and are carried only in galvanized finish. Although HTSUS subheadings are provided for convenience and customs purposes, the Department’s written description of the scope of this proceeding is dispositive.
7307.19.90.80
排除金属压缩接头
Excluded from the scope of this order are metal compression couplings,  A metal compression coupling consists of a coupling body, two gaskets, and two compression nuts. These products range in diameter from ½ inch to 2 inches and are carried only in galvanized finish. Although HTSUS subheadings are provided for convenience and customs purposes, the Department’s written description of the scope of this proceeding is dispositive.
2922.42.10.00. 2922.42.50.00, 2103.90.72.00, 2103.90.74.00, 2103.90.78.00, 2103.90.80.00,  2103.90.90.91.
味精,味素,谷氨酸一钠(味精的化学成分
Monosodium Glutamate The scope of this investigation covers monosodium glutamate (MSG), whether or not blended or in solution with other products. Specifically, MSG that has been blended or is in solution with other product(s) is included in this scope when the resulting mix contains 15% or more of MSG by dry weight. Products with which MSG may be blended include, but are not limited to, salts, sugars, starches, maltodextrins, and various seasonings. Further, MSG is included in this investigation regardless of physical form (including, but not limited to, in monohydrate or anhydrous form, or as substrates, solutions, dry powders of any particle size, or unfinished forms such as MSG slurry), end-use application, or packaging.
MSG in monohydrate form has a molecular formula of C5H8NO4Na -H2O, a Chemical Abstract Service (CAS) registry number of 6106-04-3, and a Unique Ingredient Identifier (UNII) number of W81N5U6R6U. MSG in anhydrous form has a molecular formula of C5H8NO4Na, a CAS registry number of l42-47-2, and a UNII number of C3C196L9FG
4412.31.0520; 4412.31.0540; 4412.31.0560; 4412.31.2510; 4412.31.2520; 4412.31.4040; 4412.31.4050; 4412.31.4060; 4412.31.4070; 4412.31.5125; 4412.31.5135; 4412.31.5155; 4412.31.5165; 4412.31.6000; 4412.31.9100; 4412.32.0520; 4412.32.0540; 4412.32.0560; 4412.32.2510; 4412.32.2520; 4412.32.3125; 4412.32.3135; 4412.32.3155; 4412.32.3165; 4412.32.3175; 4412.32.3185; 4412.32.5600; 4412.39.1000; 4412.39.3000; 4412.39.4011; 4412.39.4012; 4412.39.4019; 4412.39.4031; 4412.39.4032; 4412.39.4039; 4412.39.4051; 4412.39.4052; 4412.39.4059; 4412.39.4061; 4412.39.4062; 4412.39.4069; 4412.39.5010; 4412.39.5030; 4412.39.5050; 4412.94.1030; 4412.94.1050; 4412.94.3105; 4412.94.3111; 4412.94.3121; 4412.94.3131; 4412.94.3141; 4412.94.3160; 4412.94.3171; 4412.94.4100; 4412.94.5100; 4412.94.6000; 4412.94.7000; 4412.94.8000; 4412.94.9000; 4412.94.9500; 4412.99.0600; 4412.99.1020; 4412.99.1030; 4412.99.1040; 4412.99.3110; 4412.99.3120; 4412.99.3130; 4412.99.3140; 4412.99.3150; 4412.99.3160; 4412.99.3170; 4412.99.4100; 4412.99.5100; 4412.99.5710; 4412.99.6000; 4412.99.7000; 4412.99.8000; 4412.99.9000; 4412.99.9500; 4418.71.2000; 4418.71.9000; 4418.72.2000; 4418.72.9500; and 9801.00.2500.
多层实木地板
Multilayered Wood Flooring Multilayered wood flooring is composed of an assembly of two or more layers or plies of wood veneer(s). Veneer is referred to as a ply when assembled in combination with a core. The several layers, along with the core, are glued or otherwise bonded together to form a final assembled product. Multilayered wood flooring is often referred to by other terms, e.g., “engineered wood flooring” or “plywood flooring.” Regardless of the particular terminology, all products that meet the description set forth herein are intended for inclusion within the definition of subject merchandise.

All multilayered wood flooring is included within the definition of subject merchandise, without regard to: dimension (overall thickness, thickness of face ply, thickness of back ply, thickness of core, and thickness of inner plies; width; and length); wood species used for the face, back and inner veneers; core composition; and face grade. Multilayered wood flooring included within the definition of subject merchandise may be unfinished (i.e., without a finally finished surface to protect the face veneer from wear and tear) or “prefinished” (i.e., a coating applied to the face veneer, including, but not exclusively, oil or oil-modified or water-based polyurethanes, ultra-violet light cured polyurethanes, wax, epoxy-ester finishes, moisture-cured urethanes and acid-curing formaldehyde finishes). The veneers may be also soaked in an acrylic-impregnated finish. All multilayered wood flooring is included within the definition of subject merchandise regardless of whether the face (or back) of the product is smooth, wire brushed, distressed by any method or multiple methods, or hand-scraped. In addition, all multilayered wood flooring is included within the definition of subject merchandise regardless of whether or not it is manufactured with any interlocking or connecting mechanism (for example, tongue-and-groove construction or locking joints). All multilayered wood flooring is included within the definition of the subject merchandise regardless of whether the product meets a particular industry or similar standard.

The core of multilayered wood flooring may be composed of a range of materials, including but not limited to hardwood or softwood veneer, particleboard, medium-density fiberboard, high-density fiberboard (“HDF”), stone and/or plastic composite, or strips of lumber placed edge-to-edge.

Multilayered wood flooring products generally, but not exclusively, may be in the form of a strip, plank, or other geometrical patterns (e.g., circular, hexagonal). All multilayered wood flooring products are included within this definition regardless of the actual or nominal dimensions or form of the product.
Specifically excluded from the scope are cork flooring and bamboo flooring, regardless of whether any of the sub-surface layers of either flooring are made from wood. Also excluded is laminate flooring. Laminate flooring consists of a top wear layer sheet not made of wood, a decorative paper layer, a core-layer of HDF, and a stabilizing bottom layer.
5806.32.1020; 5806.32.1030; 5806.32.1050 5806.32.1060.  5806.31.00; 5806.32.20; 5806.39.20; 5806.39.30; 5808.90.00; 5810.91.00; 5810.99.90; 5903.90.10; 5903.90.25; 5907.00.60;  5806.32.1080; 5810.92.9080; 5903.90.3090;  6307.90.9889.
窄织带织布边
Narrow Woven Ribbons With Woven Selvedge The scope of the order covers narrow woven ribbons with woven selvedge, in any length, but with a width (measured at the narrowest span of the ribbon) less than or equal to 12 centimeters, composed of, in whole or in part, man-made fibers (whether artificial or synthetic, including but not limited to nylon, polyester, rayon, polypropylene, and polyethylene teraphthalate), metal threads and/or metalized yarns, or any combination thereof. Narrow woven ribbons subject to the order may:
also include natural or other non-man-made fibers;
be of any color, style, pattern, or weave construction, including but not limited to single-faced satin, double-faced satin, grosgrain, sheer, taffeta, twill, jacquard, or a combination of two or more colors, styles, patterns, and/or weave constructions;
have been subjected to, or composed of materials that have been subjected to, various treatments, including but not limited to dyeing, printing, foil stamping, embossing, flocking, coating, and/or sizing;
have embellishments, including but not limited to appliqué, fringes, embroidery, buttons, glitter, sequins, laminates, and/or adhesive backing;
have wire and/or monofilament in, on, or along the longitudinal edges of the ribbon;
have ends of any shape or dimension, including but not limited to straight ends that are perpendicular to the longitudinal edges of the ribbon, tapered ends, flared ends or shaped ends, and the ends of such woven ribbons may or may not be hemmed;
have longitudinal edges that are straight or of any shape, and the longitudinal edges of such woven ribbon may or may not be parallel to each other;
consist of such ribbons affixed to like ribbon and/or cut-edge woven ribbon, a configuration also known as an “ornamental trimming;”
be wound on spools; attached to a card; hanked (i.e., coiled or bundled); packaged in boxes, trays or bags; or configured as skeins, balls, bateaus or folds; and/or
be included within a kit or set such as when packaged with other products, including but not limited to gift bags, gift boxes and/or other types of ribbon.
Narrow woven ribbons subject to the order include all narrow woven fabrics, tapes, and labels that fall within this written description of the scope of the antidumping duty order. 
Excluded from the scope of the order are the following:
(1) formed bows composed of narrow woven ribbons with woven selvedge;
(2) “pull-bows” (i.e., an assemblage of ribbons connected to one another, folded flat and equipped with a means to form such ribbons into the shape of a bow by pulling on a length of material affixed to such assemblage) composed of narrow woven ribbons;
(3) narrow woven ribbons comprised at least 20 percent by weight of elastomeric yarn (i.e., filament yarn, including monofilament, of synthetic textile material, other than textured yarn, which does not break on being extended to three times its original length and which returns, after being extended to twice its original length, within a period of five minutes, to a length not greater than one and a half times its original length as defined in the (HTSUS, Section XI, Note 13) or rubber thread;
(4) narrow woven ribbons of a kind used for the manufacture of typewriter or printer ribbons;
(5) narrow woven labels and apparel tapes, cut-to-length or cut-to-shape, having a length (when measured across the longest edge-to-edge span) not exceeding eight centimeters;
(6) narrow woven ribbons with woven selvedge attached to and forming the handle of a gift bag;
(7) cut-edge narrow woven ribbons formed by cutting broad woven fabric into strips of ribbon, with or without treatments to prevent the longitudinal edges of the ribbon from fraying (such as by merrowing, lamination, sono-bonding, fusing, gumming or waxing), and with or without wire running lengthwise along the longitudinal edges of the ribbon;
(8) narrow woven ribbons comprised at least 85 percent by weight of threads having a denier of 225 or higher;
(9) narrow woven ribbons constructed from pile fabrics (i.e., fabrics with a surface effect formed by tufts or loops of yarn that stand up from the body of the fabric);
(10) narrow woven ribbon affixed (including by tying) as a decorative detail to non-subject merchandise, such as a gift bag, gift box, gift tin, greeting card or plush toy, or affixed (including by tying) as a decorative detail to packaging containing non-subject merchandise;
(11) narrow woven ribbon that is (a) affixed to non-subject merchandise as a working component of such non-subject merchandise, such as where narrow woven ribbon comprises an apparel trimming, book marker, bag cinch, or part of an identity card holder, or (b) affixed (including by tying) to non-subject merchandise as a working component that holds or packages such non-subject merchandise or attaches packaging or labeling to such non-subject merchandise, such as a “belly band” around a pair of pajamas, a pair of socks or a blanket;
(12) narrow woven ribbon(s) comprising a belt attached to and imported with an item of wearing apparel, whether or not such belt is removable from such item of wearing apparel; and
(13) narrow woven ribbon(s) included with non-subject merchandise in kits, such as a holiday ornament craft kit or a scrapbook kit, in which the individual lengths of narrow woven ribbon(s) included in the kit are each no greater than eight inches, the aggregate amount of narrow woven ribbon(s) included in the kit does not exceed 48 linear inches, none of the narrow woven ribbon(s) included in the kit is on a spool, and the narrow woven ribbon(s) is only one of multiple items included in the kit.
9603.40.00
天然猪鬃油漆刷和刷头
Natural Bristle Paint Brushes & Brush Heads The products covered by this investigation are natural bristle paint brushes and brush heads as currently provided for in item 760.65 of the Tariff Schedule of the United States (TSUS).Scope for Final Determination of Second Review (POR: 1994-95):
Imports covered by this review are shipments of natural bristle paint brushes and brush heads from the PRC. The merchandise under review is currently classifiable under item
9603.40.40.40 of the Harmonized Tariff Schedule of the United States (HTSUS). Although the HTSUS subheading is provided for convenience and customs purposes, the written description of the merchandise is dispositive.

Scope for Final Determination of Third Review (POR: 1995-96):
Imports covered by this review are shipments of natural bristle paint brushes and brush heads from the PRC. Excluded from the order are paint brushes with a blend of 40 percent natural bristles and 60 percent synthetic filaments. The merchandise under review is currently classifiable under item 9603.40.40.40 of the Harmonized Tariff Schedule of the United States (HTSUS). Although the HTSUS subheading is provided
for convenience and customs purposes, the written description of the merchandise is dispositive.

Scope clarification:
Paint brushes with a blend of 60% synthetic and 40% natural fibers are outside the scope of the order (59 FR 25615, 5/17/94).

Scope for Final Determination of First Review (POR: 1989-90):
Imports covered by this review are shipments of natural bristle paint brushes and brush heads from the People’s Republic of China. During the review period, such merchandise was classifiable under item 760.65 of the Tariff Schedules of the United States (“TSUS”). 
4011.20.10.25, 4011.20.10.35, 4011.20.50.30, 4011.20.50.50, 4011.61.00.00, 4011.62.00.00, 4011.63.00.00, 4011.69.00.00, 4011.92.00.00, 4011.93.40.00, 4011.93.80.00, 4011.94.40.00, and 4011.94.80.00
新的气动的非公路用轮胎
New Pneumatic Off-The-Road Tires The products covered by the scope are new pneumatic tires designed for off-the-road (OTR) and off-highway use, subject to exceptions identified below. Certain OTR tires are generally designed, manufactured and offered for sale for use on off-road or off-highway surfaces, including but not limited to, agricultural fields, forests, construction sites, factory and warehouse interiors, airport tarmacs, ports and harbors, mines, quarries, gravel yards, and steel mills. The vehicles and equipment for which certain OTR tires are designed for use include, but are not limited to: (1) agricultural and forestry vehicles and equipment, including agricultural tractors, Agricultural tractors are dual-axle vehicles that typically are designed to pull farming equipment in the field and that may have front tires of a different size than the rear tires. combine harvesters, Combine harvesters are used to harvest crops such as corn or wheat. agricultural high clearance sprayers, Agricultural sprayers are used to irrigate agricultural fields industrial tractors, Industrial tractors are dual-axle vehicles that typically are designed to pull industrial equipment and that may have front tires of a different size than the rear tires. log-skidders, A log-skidder has a grappling lift arm that is used to grasp, lift and move trees that have been cut down to a truck or trailer for transport to a mill or other destination. agricultural implements, highway-towed implements, agricultural logging, and agricultural, industrial, skid-steers/mini-loaders; Skid-steer loaders are four-wheel drive vehicles with the left-side drive wheels independent of the right-side drive wheels and lift arms that lie alongside the driver with the major pivot points behind the driver’s shoulders. Skid-steer loaders are used in agricultural, construction and industrial settings. (2) construction vehicles and equipment, including earthmover articulated dump products, rigid frame haul trucks, Haul trucks, which may be either rigid frame or articulated (i.e., able to bend in the middle) are typically used in mines, quarries and construction sites to haul soil, aggregate, mined ore, or debris. front end loaders, Front loaders have lift arms in front of the vehicle. They can scrape material from one location to another, carry material in their buckets, or load material into a truck or trailer. dozers, A dozer is a large four-wheeled vehicle with a dozer blade that is used to push large quantities of soil, sand, rubble, etc., typically around construction sites. They can also be used to perform “rough grading” in road construction. lift trucks, straddle carriers, A straddle carrier is a rigid frame, engine-powered machine that is used to load and offload containers from container vessels and load them onto (or off of) tractor trailers. graders, A grader is a vehicle with a large blade used to create a flat surface. Graders are typically used to perform “finish grading.” Graders are commonly used in maintenance of unpaved roads and road construction to prepare the base course onto which asphalt or other paving material will be laid. mobile cranes, i.e., “on-site” mobile cranes designed for off-highway use.

compactors; and (3) industrial vehicles and equipment, including smooth floor, industrial, mining, counterbalanced lift trucks, industrial and mining vehicles other than smooth floor, skid-steers/mini-loaders, and smooth floor off-the-road counterbalanced lift trucks. A counterbalanced lift truck is a rigid framed, engine-powered machine with lift arms that has additional weight incorporated into the back of the machine to offset or counterbalance the weight of loads that it lifts so as to prevent the vehicle from overturning. An example of a counterbalanced lift truck is a counterbalanced fork lift truck. Counterbalanced lift trucks may be designed for use on smooth floor surfaces, such as a factory or warehouse, or other surfaces, such as construction sites, mines, etc. The foregoing list of vehicles and equipment generally have in common that they are used for hauling, towing, lifting, and/or loading a wide variety of equipment and materials in agricultural, construction and industrial settings. Such vehicles and equipment, and the descriptions contained in the footnotes are illustrative of the types of vehicles and equipment that use certain OTR tires, but are not necessarily all-inclusive. While the physical characteristics of certain OTR tires will vary depending on the specific applications and conditions for which the tires are designed (e.g., tread pattern and depth), all of the tires within the scope have in common that they are designed for off-road and off-highway use. Except as discussed below, OTR tires included in the scope of the proceeding range in size (rim diameter) generally but not exclusively from 8 inches to 54 inches. The tires may be either tube-type. or tubeless, radial or non-radial, and intended for sale either to original equipment manufacturers or the replacement market
While tube-type tires are subject to the scope of this proceeding, tubes and flaps are not subject merchandise and therefore are not covered by the scope of this proceeding, regardless of the manner in which they are sold (e.g.sold with or separately from subject merchandise).

Specifically excluded from the scope are new pneumatic tires designed, manufactured and offered for sale primarily for on-highway or on-road use, including passenger cars, race cars, station wagons, sport utility vehicles, minivans, mobile homes, motorcycles, bicycles, on-road or on-highway trailers, light trucks, and trucks and buses. Such tires generally have in common that the symbol “DOT” must appear on the sidewall, certifying that the tire conforms to applicable motor vehicle safety standards. Such excluded tires may also have the following designations that are used by the Tire and Rim Association:

Prefix letter designations:
P - Identifies a tire intended primarily for service on passenger cars;
LT - Identifies a tire intended primarily for service on light trucks; and,
ST - Identifies a special tire for trailers in highway service.

Suffix letter designations:
TR - Identifies a tire for service on trucks, buses, and other vehicles with rims having specified rim diameter of nominal plus 0.156” or plus 0.250”;
MH - Identifies tires for Mobile Homes;
HC - Identifies a heavy duty tire designated for use on “HC” 15” tapered rims used on trucks, buses, and other vehicles. This suffix is intended to differentiate among tires for light trucks, and other vehicles or other services, which use a similar designation.
Example: 8R17.5 LT, 8R17.5 HC;
LT - Identifies light truck tires for service on trucks, buses, trailers, and multipurpose passenger vehicles used in nominal highway service; and
MC - Identifies tires and rims for motorcycles.

The following types of tires are also excluded from the scope: pneumatic tires that are not new, including recycled or retreaded tires and used tires; non-pneumatic tires, including solid rubber tires; tires of a kind designed for use on aircraft, all-terrain vehicles, and vehicles for turf, lawn and garden, golf and trailer applications. Also excluded from the scope are radial and bias tires of a kind designed for use in mining and construction vehicles and equipment that have a rim diameter equal to or exceeding 39 inches. Such tires may be distinguished from other tires of similar size by the number of plies that the construction and mining tires contain (minimum of 16) and the weight of such tires (minimum 1500 pounds).
7307.11.00.30, 7307.11.00.60, 7307.19.30.60 7307.19.30.85
非延展铸铁管件
Non-Malleable Cast Iron Pipe Fittings The prodcuts covered by this order are
finished and unfinished non-malleable cast iron pipe fittings with an
inside diameter ranging from 1/4 inch to 6 inches, whether threaded or
un-threaded, regardless of industry or proprietary specifications. The
subject fittings include elbows, ells, tees, crosses, and reducers as
well as flanged fittings. These pipe fittings are also known as ``cast
iron pipe fittings'' or ``gray iron pipe fittings.'' These cast iron
pipe fittings are normally produced to ASTM A-126 and ASME B.l6.4
specifications and are threaded to ASME B1.20.1 specifications. Most
building codes require that these products are Underwriters
Laboratories (UL) certified. The scope does not include cast iron soil
pipe fittings or grooved fittings or grooved couplings.
Fittings that are made out of ductile iron that have the same
physical characteristics as the gray or cast iron fittings subject to
the scope above or which have the same physical characteristics and are
produced to ASME B.16.3, ASME B.16.4, or ASTM A-395 specifications,
threaded to ASME B1.20.1 specifications and UL certified, regardless of
metallurgical differences between gray and ductile iron, are also
included in the scope of this petition
These ductile fittings do not
include grooved fittings or grooved couplings. Ductile cast iron
fittings with mechanical joint ends (MJ), or push on ends (PO), or
flanged ends and produced to the American Water Works Association
(AWWA) specifications AWWA C110 or AWWA C153 are not included.
7225.19.0000, 7226.19.1000, 7226.19.9000  7225.50.8085, 7225.99.0090, 7226.92.5000, 7226.92.7050, 7226.92.8050, 7226.99.0180 无取向电工钢 Non-Oriented Electrical Steel
The merchandise subject to this order consists of non-oriented electrical steel (NOES), which includes cold-rolled, flat-rolled, alloy steel products, whether or not in coils, regardless of width, having an actual thickness of 0.20 mm or more, in which the core loss is substantially equal in any direction of magnetization in the plane of the material. The term “substantially equal” means that the cross grain direction of core loss is no more than 1.5 times the straight grain direction (i.e., the rolling direction) of core loss. NOES has a magnetic permeability that does not exceed 1.65 Tesla when tested at a field of 800 A/m (equivalent to 10 Oersteds) along (i.e., parallel to) the rolling direction of the sheet (i.e., B800 value). NOES contains by weight more than 1.00 percent of silicon but less than 3.5 percent of silicon, not more than 0.08 percent of carbon, and not more than 1.5 percent of aluminum. NOES has a surface oxide coating, to which an insulation coating may be applied.

NOES is subject to this order whether it is fully processed (i.e., fully annealed to develop final magnetic properties) or semi-processed (i.e., finished to final thickness and physical form but not fully annealed to develop final magnetic properties). Fully processed NOES is typically made to the requirements of ASTM specification A 677, Japanese Industrial Standards (JIS) specification C 2552, and/or International Electrotechnical Commission (IEC) specification 60404-8-4. Semi-processed NOES is typically made to the requirements of ASTM specification A 683. However, the scope of this order is not limited to merchandise meeting the ASTM, JIS, and IEC specifications noted immediately above.

NOES is sometimes referred to as cold-rolled non-oriented (CRNO), non-grain oriented (NGO), non-oriented (NO), or cold-rolled non-grain oriented (CRNGO) electrical steel. These terms are interchangeable.
Excluded from the scope of this order are flat-rolled products not in coils that, prior to importation into the United States, have been cut to a shape and undergone all punching, coating, or other operations necessary for classification in Chapter 85 of the Harmonized Tariff Schedule of the United States (HTSUS) as a part (i.e., lamination) for use in a device such as a motor, generator, or transformer. 
7304.29.10.10, 7304.29.10.20, 7304.29.10.30, 7304.29.10.40, 7304.29.10.50, 7304.29.10.60, 7304.29.10.80, 7304.29.20.10, 7304.29.20.20, 7304.29.20.30, 7304.29.20.40, 7304.29.20.50, 7304.29.20.60, 7304.29.20.80, 7304.29.31.10, 7304.29.31.20, 7304.29.31.30, 7304.29.31.40, 7304.29.31.50, 7304.29.31.60, 7304.29.31.80, 7304.29.41.10, 7304.29.41.20, 7304.29.41.30, 7304.29.41.40, 7304.29.41.50, 7304.29.41.60, 7304.29.41.80, 7304.29.50.15, 7304.29.50.30, 7304.29.50.45, 7304.29.50.60, 7304.29.50.75, 7304.29.61.15, 7304.29.61.30, 7304.29.61.45, 7304.29.61.60, 7304.29.61.75, 7305.20.20.00, 7305.20.40.00, 7305.20.60.00, 7305.20.80.00, 7306.29.10.30, 7306.29.10.90, 7306.29.20.00, 7306.29.31.00, 7306.29.41.00, 7306.29.60.10, 7306.29.60.50, 7306.29.81.10, and 7306.29.81.50.
7304.39.00.24, 7304.39.00.28, 7304.39.00.32, 7304.39.00.36, 7304.39.00.40, 7304.39.00.44, 7304.39.00.48, 7304.39.00.52, 7304.39.00.56, 7304.39.00.62, 7304.39.00.68, 7304.39.00.72, 7304.39.00.76, 7304.39.00.80, 7304.59.60.00,, 7304.59.80.15, 7304.59.80.20, 7304.59.80.25, 7304.59.80.30, 7304.59.80.35, 7304.59.80.40, 7304.59.80.45, 7304.59.80.50, 7304.59.80.55, 7304.59.80.60, 7304.59.80.65, 7304.59.80.70,  7304.59.80.80.
石油工业用管材
Oil Country Tubular Goods The scope of this order consists of certain OCTG, which are hollow steel products of circular cross-section, including oil well casing and tubing, of iron (other than cast iron) or steel (both carbon and alloy), whether seamless or welded, regardless of end finish (e.g., whether or not plain end, threaded, or threaded and coupled) whether or not conforming to American Petroleum Institute (“API”) or non-API specifications, whether finished (including limited service OCTG products) or unfinished (including green tubes and limited service OCTG products), whether or not thread protectors are attached. The scope of the order also covers OCTG coupling stock. Excluded from the scope of the order are casing or tubing containing 10.5 percent or more by weight of chromium; drill pipe; unattached couplings; and unattached thread protectors.
8305.90.3010
纸夹,回纹针
Paper Clips The products covered by this order are certain paper clips, wholly of wire of base metal, whether or not galvanized, whether or not plated with nickel or other base metal (e.g., copper), with a wire diameter between 0.025 inches and 0.075 inches (0.64 to 1.91 millimeters), regardless of physical configuration, except as specifically excluded. The products subject to this order may have rectangular or ring-like shape and include, but are not limited to, clips commercially referred to as No. 1 clips, No. 3 clips, Jumbo or Giant clips, Gem clips, Frictioned clips, Perfect Gems, Marcel Gems, Univeral clips, Nifty clips, Peerless clips, Ring clips, and Glide-On clips Specifically excluded from the scope of this order are plastic and vinyl covered paper clips, butterfly clips, binder clips, or other paper fasteners that are not made wholly of wire of base metal and are covered under a separate subheading of the Harmonized Tariff Schedule of the United States (HTSUS).
4011.10.10.10, 4011.10.10.20, 4011.10.10.30, 4011.10.10.40, 4011.10.10.50, 4011.10.10.60, 4011.10.10.70, 4011.10.50.00, 4011.20.10.05, and 4011.20.50.10. 4011.99.45.10, 4011.99.45.50, 4011.99.85.10, 4011.99.85.50, 8708.70.45.45, 8708.70.45.60, 8708.70.60.30, 8708.70.60.45,  8708.70.60.60.
乘用车和轻型货车轮胎
Passenger Vehicle And Light Truck Tires The scope of these orders is passenger vehicle and light truck tires. Passenger vehicle and light truck tires are new pneumatic tires, of rubber, with a passenger vehicle or light truck size designation. Tires covered by these orders may be tube-type, tubeless, radial, or non-radial, and they may be intended for sale to original equipment manufacturers or the replacement market.
Subject tires have, at the time of importation, the symbol “DOT” on the sidewall, certifying that the tire conforms to applicable motor vehicle safety standards. Subject tires may also have the following prefixes or suffix in their tire size designation, which also appears on the sidewall of the tire:
Prefix designations:
P - Identifies a tire intended primarily for service on passenger cars
LT- Identifies a tire intended primarily for service on light trucks
Suffix letter designations:
LT - Identifies light truck tires for service on trucks, buses, trailers, and multipurpose passenger vehicles used in nominal highway service.
All tires with a “P” or “LT” prefix, and all tires with an “LT” suffix in their sidewall markings are covered by this investigation regardless of their intended use.
In addition, all tires that lack a “P” or “LT” prefix or suffix in their sidewall markings, as well as all tires that include any other prefix or suffix in their sidewall markings, are included in the scope, regardless of their intended use, as long as the tire is of a size that is among the numerical size designations listed in the passenger car section or light truck section of the Tire and Rim Association Year Book, as updated annually, unless the tire falls within one of the specific exclusions set out below.
Passenger vehicle and light truck tires, whether or not attached to wheels or rims, are included in the scope. However, if a subject tire is imported attached to a wheel or rim, only the tire is covered by the scope
Specifically excluded from the scope are the following types of tires:
(1) racing car tires; such tires do not bear the symbol “DOT” on the sidewall and may be marked with “ZR” in size designation;
(2) new pneumatic tires, of rubber, of a size that is not listed in the passenger car section or light truck section of the Tire and Rim Association Year Book;
(3) pneumatic tires, of rubber, that are not new, including recycled and retreaded tires;
(4) non-pneumatic tires, such as solid rubber tires;
(5) tires designed and marketed exclusively as temporary use spare tires for passenger vehicles which, in addition, exhibit each of the following physical characteristics:
(a) the size designation and load index combination molded on the tire’s sidewall are listed in Table PCT-1B (“T” Type Spare Tires for Temporary Use on Passenger Vehicles) of the Tire and Rim Association Year Book,
(b) the designation “T” is molded into the tire’s sidewall as part of the size designation, and,
(c) the tire’s speed rating is molded on the sidewall, indicating the rated speed in MPH or a letter rating as listed by Tire and Rim Association Year Book, and the rated speed is 81 MPH or a “M” rating;
(6) tires designed and marketed exclusively for specialty tire (ST) use which, in addition, exhibit each of the following conditions:
(a) the size designation molded on the tire’s sidewall is listed in the ST sections of the Tire and Rim Association Year Book,
(b) the designation “ST” is molded into the tire’s sidewall as part of the size designation,
(c) the tire incorporates a warning, prominently molded on the sidewall, that the tire is “For Trailer Service Only” or “For Trailer Use Only”,
(d) the load index molded on the tire’s sidewall meets or exceeds those load indexes listed in the Tire and Rim Association Year Book for the relevant ST tire size, and
(e) either
(i) the tire’s speed rating is molded on the sidewall, indicating the rated speed in MPH or a letter rating as listed by Tire and Rim Association Year Book, and the rated speed does not exceed 81 MPH or an “M” rating; or
(ii) the tire’s speed rating molded on the sidewall is 87 MPH or an “N” rating, and in either case the tire’s maximum pressure and maximum load limit are molded on the sidewall and either
(1) both exceed the maximum pressure and maximum load limit for any tire of the same size designation in either the passenger car or light truck section of the Tire and Rim Association Year Book; or
(2) if the maximum cold inflation pressure molded on the tire is less than any cold inflation pressure listed for that size designation in either the passenger car or light truck section of the Tire and Rim Association Year Book, the maximum load limit molded on the tire is higher than the maximum load limit listed at that cold inflation pressure for that size designation in either the passenger car or light truck section of the Tire and Rim Association Year Book;
(7) tires designed and marketed exclusively for off-road use and which, in addition, exhibit each of the following physical characteristics:
(a) the size designation and load index combination molded on the tire’s sidewall are listed in the off-the-road, agricultural, industrial or ATV section of the Tire and Rim Association Year Book,
(b) in addition to any size designation markings, the tire incorporates a warning, prominently molded on the sidewall, that the tire is “Not For Highway Service” or “Not for Highway Use”,
(c) the tire’s speed rating is molded on the sidewall, indicating the rated speed in MPH or a letter rating as listed by the Tire and Rim Association Year Book, and the rated speed does not exceed 55 MPH or a “G” rating,
9609.10.00
铅笔
Pencils, Cased  The products covered by this investigation are certain cased pencils of any shape or dimension which are writing and/or drawing instruments that feature cores of graphite or other materials, encased in wood and/or man-made mateials, whether or not decorated and whether or not tipped (e.g. , with erasers, etc.) in any fashion, and either sharpened or unsharpened Specifically excluded from the scope of this investigation are mechanical pencils, cosmetic pencils, pens, non-cased crayons (wax), pastels, charcoals, and chalks.
2833.40.60
过硫酸盐
Persulfates The products covered by this review are persulfates, including ammonium, potassium, and sodium persulfates. The chemical formula for these persulfates are, respectively, (NH sub4 ) sub2 S sub2 O sub8 , K sub2 S sub2 O sub8 , and Na sub2 S sub2 O sub8
2833.40.20.
过硫酸钠
Sodium
persulfate
3406.00.00
石蜡蜡烛
Petroleum Wax Candles The products covered by this investigation are certain scented or unscented petroleum wax candles made from petroleum wax and having fiber or paper-cored wicks. They are sold in the following shapes: tapers, spirals and straight-sided dinner candles; rounds, columns, pillars, votives; and various wax-filled containers. 
5503.20.0045 5503.20.0065
涤纶短纤; 聚酯短纤维; 聚酯棉; 涤纶短纤维
Polyester Staple Fiber The merchandise covered by the order is synthetic staple fibers, not carded, combed or otherwise processed for spinning, of polyesters measuring 3.3 decitex (3 denier, inclusive) or more in diameter. This merchandise is cut to lengths varying from one inch (25 mm) to five inches (127 mm). The subject merchandise may be coated, usually with a silicon or other finish, or not coated. PSF is generally used as stuffing in sleeping bags, mattresses, ski jackets, comforters, cushions, pillows, and furniture.  The following products are excluded from the scope: (1) PSF of less than 3.3 decitex (less than 3 denier) and known to the industry as PSF for spinning and generally used in woven and knit applications to produce textile and apparel products   (2) PSF of 10 to 18 denier that are cut to lengths of 6 to 8 inches and that are generally used in the manufacture of carpeting; and (3) low-melt PSF defined as a bi-component fiber with an outer, non-polyester sheath that melts at a significantly lower temperature than its inner polyester core 
5503.20.0025
某些涤纶短纤; 聚酯短纤维; 聚酯棉; 涤纶短纤维除外
Polyester Staple FiberThe following products are excluded from the scope: (1) PSF of less than 3.3 decitex (less than 3 denier)  and known to the industry as PSF for spinning and generally used in woven and knit applications to produce textile and apparel products
5503.20.0015
某些涤纶短纤; 聚酯短纤维; 聚酯棉; 涤纶短纤维除外
Polyester Staple Fiber (2) PSF of 10 to 18 denier that are cut to lengths of 6 to 8 inches and that are generally used in the manufacture of carpeting; and (3) low-melt PSF defined as a bi-component fiber with an outer, non-polyester sheath that melts at a significantly lower temperature than its inner polyester core 
3923.21.0085
购物袋; 包装袋; 聚乙烯零售购物袋
Polyethylene Retail Carrier Bags The merchandise subject to this antidumping duty order are polyethylene retail carrier bags (PRCBs), which also may be referred to as t-shirt sacks, merchandise bags, grocery bags, or checkout bags. The subject merchandise is defined as non-sealable sacks and bags with handles (including drawstrings), without zippers or integral extruded closures, with or without gussets, with or without printing, of polyethylene film having a thickness no greater than 0.035 inch (0.889 mm) and no less than 0.00035 inch (0.00889 mm), and with no length or width shorter than 6 inches (15.24 cm) or longer than 40 inches (101.6 cm). The depth of the bag may be shorter than 6 inches (15.24 cm) but not longer than 40 inches (101.6 cm).

PRCBs are typically provided without any consumer packaging and free of charge by retail establishments, e.g., grocery, drug, convenience, department, specialty retail, discount stores, and restaurants to their customers to package and carry their purchased products. The scope of this antidumping duty order excludes (1) PRCBs that are not printed with logos or store names and that are closeable with drawstrings made of polyethylene film and (2) PRCBs that are packed in consumer packaging with printing that refers to specific end-uses other than packaging and carrying merchandise from retail establishments, e.g., garbage bags, lawn bags, trash-can liners.
3920.62.00.90
聚对苯二甲酸乙二醇酯(聚酯)薄膜
Polyethylene Terephthalate (Pet) Film The products covered by the order are all gauges of raw, pre-treated, or primed PET film, whether extruded or co-extruded Excluded are metalized films and other finished films that have had at least one of their surfaces modified by the application of a performance-enhancing resinous or inorganic layer more than 0.00001 inches thick. Also excluded is roller transport cleaning film which has at least one of its surfaces modified by application of 0.5 micrometers of SBR latex. Tracing and drafting film is also excluded.
3905.30.00
聚乙烯醇
Polyvinyl Alcohol The merchandise covered by this investigation is polyvinyl alcohol (PVA). This product consists of all PVA hydrolyzed in excess of 80 percent, whether or not mixed or diluted with commercial levels of defoamer or boric acid,  The following products are specifically excluded from the scope of this investigation:
1) PVA in fiber form.
2) PVA with hydrolysis less than 83 mole percent and certified not for use in the production of textiles.

3) PVA with hydrolysis greater than 85 percent and viscosity greater than or equal to 90 cps.
4) PVA with a hydrolysis greater than 85 percent, viscosity greater than or equal to 80 cps but less than 90 cps, certified for use in an ink jet application.
5) PVA for use in the manufacture of an excipient or as an excipient in the manufacture of film coating systems which are components of a drug or dietary supplement, and accompanied by an end-use certification.
6) PVA covalently bonded with cationic monomer uniformly present on all polymer chains in a concentration equal to or greater than one mole percent.
7) PVA covalently bonded with carboxylic acid uniformly present on all polymer chains in a concentration equal to or greater than two mole percent, certified for use in a paper application.
8) PVA covalently bonded with thiol uniformly present on all polymer chains, certified for use in emulsion polymerization of non-vinyl acetic material.
9) PVA covalently bonded with paraffin uniformly present on all polymer chains in a concentration equal to or greater than one mole percent.
10) PVA covalently bonded with silan uniformly present on all polymer chains certified for use in paper coating applications.
11) PVA covalently bonded with sulfonic acid uniformly present on all polymer chains in a concentration level equal to or greater than one mole percent.
12) PVA covalently bonded with acetoacetylate uniformly present on all polymer chains in a concentration level equal to or greater than one mole percent.
13) PVA covalently bonded with polyethylene oxide uniformly present on all polymer chains in a concentration level equal to or greater than one mole percent.
14) PVA covalently bonded with quaternary amine uniformly present on all polymer chains in a concentration level equal to or greater than one mole percent.

15) PVA covalently bonded with diacetoneacrylamide uniformly present on all polymer chains in a concentration level greater than three mole percent, certified for use in a paper application.
7323.94.00
瓷对钢炊具 
Porcelain-On-Steel Cooking Ware Imports covered by this review are shipments of porcelain-on-steel (POS) cooking ware, including tea kettles, which do not have self-contained electric heating elements. All of the foregoing are constructed of steel and are enameled or glazed with vitreous glasses
2841.61.00
高锰酸钾
Potassium Permanganate Imports covered by this order are shipments of potassium permanganate, an inorganic chemical produced in free-flowing, technical, and pharmaceutical grades
2835.39.1000 
磷酸钾盐 
Potassium Phosphate Salts The phosphate salts covered by this order include anhydrous Dipotassium Phosphate (“DKP”) and Tetrapotassium Pyrophosphate (“TKPP”), whether anhydrous or in solution (collectively “phosphate salts”).
TKPP, also known as normal potassium pyrophosphate, Diphosphoric acid or Tetrapotassium salt, is a potassium salt with the formula K4P2O7. The CAS registry number for TKPP is 7320-34-5. TKPP is typically 18.7% phosphorus and 47.3% potassium. It is generally greater than or equal to 43.0% P2O5 content
2835.24.0000
磷酸钾盐 的一种, 俗称二钾盐或正磷酸氢二钾
Potassium Phosphate Salts DKP, also known as Dipotassium salt, Dipotassium hydrogen orthophosphate or Potassium phosphate, dibasic, has a chemical formula of K2HPO4. The CAS registry number for DKP is 7758-11-4. DKP is typically 17.8% phosphorus, 44.8% potassium and 40% P2O5 content
7217.10.8045  7217.10.7000, 7217.10.8025, 7217.10.8030, 7217.10.8090, 7217.10.9000, 7229.90.1000, 7229.90.5016, 7229.90.5031, 7229.90.5051, 7229.90.9000, 7312.10.3012.
预应力混凝土钢 - 铁路连接线
Prestressed Concrete Steel Rail Tie Wire The product covered by this investigation is high carbon steel wire; stress relieved or low relaxation; indented or otherwise deformed; meeting at a minimum the physical, mechanical, and chemical requirements of the American Society of Testing Materials (ASTM) A881/A881M specification; regardless of shape, size or alloy element levels; suitable for use as prestressed tendons in concrete railroad ties (PC tie wire). High carbon steel is defined as steel that contains 0.6 percent or more of carbon by weight. 
7312.10.3010  7312.10.3012
预应力混凝土结构用钢绞线,预应力混凝土钢丝绳
Prestressed Concrete Steel Wire Strand The scope of this order consists of PC strand, produced from wire of non-stainless, non-galvanized steel, which is suitable for use in prestressed concrete (both pretensioned and post-tensioned) applications. The product definition encompasses covered and uncovered strand and all types, grades, and diameters of PC strand. PC strand is normally sold in the United States in sizes ranging from 0.25 inches to 0.70 inches in diameter. PC strand made from galvanized wire is only excluded from the scope if the zinc and/or zinc oxide coating meets or exceeds the 0.40 oz./ft2 standard set forth in ASTM-A-475
8104.30.00
颗粒形式的纯镁
Pure Magnesium In Granular Form There is an existing antidumping duty order on pure magnesium from the People’s Republic of China (PRC). See Notice of Antidumping Duty Orders: Pure Magnesium From the People’s Republic of China, the Russian Federation and Ukraine; Notice of Amended Final Determination of Sales at Less Than Fair Value: Antidumping Duty Investigation of Pure Magnesium From the Russian Federation, 60 FR 25691 (May 12, 1995). The scope of this order excludes pure magnesium that is already covered by the existing order on pure magnesium in ingot form, and currently classifiable under item numbers 8104.11.00 and 8104.19.00 of the Harmonized Tariff Schedule of the United States (“HTSUS”).
The scope of this order includes imports of pure magnesium products, regardless of chemistry, including, without limitation, raspings, granules, turnings, chips, powder, and briquettes, except as noted above.
Pure magnesium includes: (1) Products that contain at least 99.95 percent primary magnesium, by weight (generally referred to as “ultra pure” magnesium); (2) products that contain less than 99.95 percent but not less than 99.8 percent primary magnesium, by weight (generally referred to as “pure” magnesium); (3) chemical combinations of pure magnesium and other material(s) in which the pure magnesium content is 50 percent or greater, but less than 99.8 percent, by weight, that do not conform to an “ASTM Specification for Magnesium Alloy” The meaning of this term is the same as that used by the American Society for Testing and Materials in its Annual Book of ASTM Standards: Volume 01.02 Aluminum and Magnesium Alloys. (generally referred to as “off specification pure” magnesium); and (4) physical mixtures of pure magnesium and other material(s) in which the pure magnesium content is 50 percent or greater, but less than 99.8 percent, by weight. Excluded from this order are mixtures containing 90 percent or less pure magnesium by weight and one or more of certain non-magnesium granular materials to make magnesium-based reagent mixtures. The non-magnesium granular materials of which the Department is aware used to make such excluded reagents are: lime, calcium metal, calcium silicon, calcium carbide, calcium carbonate, carbon, slag coagulants, fluorspar, nephaline syenite, feldspar, aluminum, alumina (Al2O3), calcium aluminate, soda ash, hydrocarbons, graphite, coke, silicon, rare earth metals/mischmetal, cryolite, silica/fly ash, magnesium oxide, periclase, ferroalloys, dolomitic lime, and colemanite. A party importing a magnesium-based reagent which includes one or more materials not on this list is required to seek a scope clarification from the Department before such a mixture may be imported free of antidumping duties.
8104.11.00, 8104.19.00, 8104.20.00, 8104.30.00, 8104.90.00, 3824.90.11, 3824.90.19 9817.00.9
纯镁
Pure Magnesium  The product covered by this order is pure primary magnesium regardless of chemistry, form or size, unless expressly excluded from the scope of this order. Primary magnesium is a metal or alloy containing by weight primarily the element magnesium and produced by decomposing raw materials into magnesium metal. Pure primary magnesium is used primarily as a chemical in the aluminum alloying, desulfurization, and chemical reduction industries. In addition, pure primary magnesium is used as an input in producing magnesium alloy.

Pure primary magnesium encompasses products (including, but not limited to, butt ends, stubs, crowns and crystals) <SUP>2</SUP> with the following primary magnesium contents:
---------------------------------------------------------------------------
\2\ Since the antidumping duty order was issued, we have clarified that the scope of the original order includes, but is not limited to, butt ends, stubs, crowns and crystals. See May 22, 1997, instructions in U.S. customs and November 14, 1997, Final Scope Rule of Antidumping Duty Order on Pure Magnesium from the PRC.
---------------------------------------------------------------------------
(1) Products that contain at least 99.95% primary magnesium, by weight[[Page 3086]]
(generally referred to as ``ultra-pure'' magnesium);

(2) Products that contain less than 99.95% but not less than 99.8% primary magnesium, by weight (generally referred to as ``pure'' magnesium); and

(3) Products (generally referred to as ``off-specification pure'' magnesium) that contain 50% or greater, but less than 99.8% primary magnesium, by weight, and that do not conform to ASTM specifications for alloy magnesium.

``Off-specification pure'' magnesium is pure primary magnesium containing magnesium scrap, secondary magnesium, oxidized magnesium or impurities (whether or not intentionally added) that cause the primary magnesium content to fall below 99.8% by weight. It generally does not contain, individually or in combination, 1.5% or more, by weight, of the following alloying elements: Aluminum, manganese, zinc, silicon,
thorium, zirconium and rare earths.
Excluded from the scope of this order are alloy primary magnesium (that meets specifications for alloy magnesium), primary magnesium anodes, granular primary magnesium (including turnings, chips and powder), having a maximum physical dimension (i.e., length or diameter) of one inch or less, secondary magnesium (which has pure primary magnesium content of less than 50% by weight), and remelted magnesium
whose pure primary magnesium content is less than 50% by weight.
8505.19.10  8505.19.20
纯镁
Raw Flexible Magnets  The products covered by this order are certain flexible magnets regardless of shape (see footnote 1), color, or packaging (see footnote 2). Subject flexible magnets are bonded magnets composed (not necessarily exclusively) of (i) any one or combination of various flexible binders (such as polymers or co-polymers, or rubber) and (ii) a magnetic element, which may consist of a ferrite permanent magnet material (commonly, strontium or barium ferrite, or a combination of the two), a metal alloy (such as NdFeB or Alnico), any combination of the foregoing with each other or any other material, or any other material capable of being permanently magnetized.

Subject flexible magnets may be in either magnetized or unmagnetized (including demagnetized) condition, and may or may not be fully or partially laminated or fully or partially bonded with paper, plastic, or other material, of any composition and/or color. Subject flexible magnets may be uncoated or may be coated with an adhesive or any other coating or combination of coatings.
Specifically excluded from the scope of this order are printed flexible magnets, defined as flexible magnets (including individual magnets) that are laminated or bonded with paper, plastic, or other material if such paper, plastic, or other material bears printed text and/or images, including but not limited to business cards, calendars, poetry, sports event schedules, business promotions, decorative motifs, and the like. This exclusion does not apply to such printed flexible magnets if the printing concerned consists of only the following: a trade mark or trade name; country of origin; border, stripes, or lines; any printing that is removed in the course of cutting and/or printing magnets for retail sale or other disposition from the flexible magnet; manufacturing or use instructions (e.g., “print this side up,” “this side up,” “laminate here”); printing on adhesive backing (that is, material to be removed in order to expose adhesive for use such as application of laminate) or on any other covering that is removed from the flexible magnet prior or subsequent to final printing and before use; non-permanent printing (that is, printing in a medium that facilitates easy removal, permitting the flexible magnet to be re-printed); printing on the back (magnetic) side; or any combination of the above. 
2818.10.20.00 2818.10.20.90
褐色精制氧化铝
Refined Brown Aluminum Oxide The merchandise covered by this order is ground, pulverized or refined brown artificial corundum, also known as brown aluminum oxide or brown fused alumina, in grit size of 3/8 inch or less. Excluded from the scope of the order is crude artificial corundum in which particles with a diameter greater than 3/8 inch constitute at least 50 percent of the total weight of the entire batch. The scope includes brown artificial corundum in which particles with a diameter greater than 3/8 inch constitute less than 50 percent of the total weight of the batch.
2925.11.00
糖精或邻苯甲酰磺酰亚胺
Saccharin The product covered by this antidumping duty order is saccharin. Saccharin is defined as a non-nutritive sweetener used in beverages and foods, personal care products such as toothpaste, table top sweeteners, and animal feeds. It is also used in metalworking fluids. There are four primary chemical compositions of saccharin: (1) Sodium saccharin (American Chemical Society Chemical Abstract Service (“CAS”) Registry 128-44-9); (2) calcium saccharin (CAS Registry 6485-34-3); (3) acid (or insoluble) saccharin (CAS Registry 81-07-2); and (4) research grade saccharin. Most of the U.S.-produced and imported grades of saccharin from the PRC are sodium and calcium saccharin, which are available in granular, powder, spray-dried powder, and liquid forms
7304.19.1020, 7304.19.1030, 7304.19.1045, 7304.19.1060, 7304.19.5020, 7304.19.5050, 7304.31.6050, 7304.39.0016, 7304.39.0020, 7304.39.0024, 7304.39.0028, 7304.39.0032, 7304.39.0036, 7304.39.0040, 7304.39.0044, 7304.39.0048, 7304.39.0052, 7304.39.0056, 7304.39.0062, 7304.39.0068, 7304.39.0072, 7304.51.5005, 7304.51.5060, 7304.59.6000, 7304.59.8010, 7304.59.8015, 7304.59.8020, 7304.59.8025, 7304.59.8030, 7304.59.8035, 7304.59.8040, 7304.59.8045, 7304.59.8050, 7304.59.8055, 7304.59.8060, 7304.59.8065, 7304.59.8070.
无缝碳钢和合金钢标准的线,和压力管道 
Seamless Carbon And Alloy Steel Standard, Line, And Pressure Pip The merchandise covered by this order is certain seamless carbon and alloy steel (other than stainless steel) pipes and redraw hollows, less than or equal to 16 inches (406.4 mm) in outside diameter, regardless of wall-thickness, manufacturing process (e.g., hot-finished or cold-drawn), end finish (e.g., plain end, beveled end, upset end, threaded, or threaded and coupled), or surface finish (e.g., bare, lacquered or coated). Redraw hollows are any unfinished carbon or alloy steel (other than stainless steel) pipe or “hollow profiles” suitable for cold finishing operations, such as cold drawing, to meet the American Society for Testing and Materials (“ASTM”) or American Petroleum Institute (“API”) specifications referenced below, or comparable specifications. Specifically included within the scope are seamless carbon and alloy steel (other than stainless steel) standard, line, and pressure pipes produced to the ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-589, ASTM A-795, ASTM A-1024, and the API 5L specifications, or comparable specifications, and meeting the physical parameters described above, regardless of application, with the exception of the exclusion discussed below. Specifically excluded from the scope of the order are: (1) all pipes meeting aerospace, hydraulic, and bearing tubing specifications; (2) all pipes meeting the chemical requirements of ASTM A-335, whether finished or unfinished; and (3) unattached couplings. Also excluded from the scope of the order are all mechanical, boiler, condenser and heat exchange tubing, except when such products conform to the dimensional requirements, i.e., outside diameter and wall thickness of ASTM A-53, ASTM A-106 or API 5L specifications.
7411.10.1030  7411.10.1090 7407.10.1500, 7419.99.5050, 8415.90.8065,  8415.90.8085
无缝精炼铜管
Seamless Refined Copper Pipe And Tube For the purpose of this order, the products covered are all seamless circular refined copper pipes and tubes, including redraw hollows, greater than or equal to 6 inches (152.4 mm) in length and measuring less than 12.130 inches (308.102 mm) (actual) in outside diameter (“OD”), regardless of wall thickness, bore (e.g., smooth, enhanced with inner grooves or ridges), manufacturing process (e.g., hot finished, cold-drawn, annealed), outer surface (e.g., plain or enhanced with grooves, ridges, fins, or gills), end finish (e.g., plain end, swaged end, flared end, expanded end, crimped end, threaded), coating (e.g., plastic, paint), insulation, attachments (e.g., plain, capped, plugged, with compression or other fitting), or physical configuration (e.g., straight, coiled, bent, wound on spools).
The scope of these orders covers, but is not limited to, seamless refined copper pipe and tube produced or comparable to the American Society for Testing and Materials (“ASTM”) ASTM-B42, ASTM-B68, ASTM-B75, ASTM-B88, ASTM-B88M, ASTM-B188, ASTM-B251, ASTM-B251M, ASTM-B280, ASTM-B302, ASTM-B306, ASTM-359, ASTM-B743, ASTM-B819, and ASTM-B903 specifications and meeting the physical parameters described therein. Also included within the scope of these orders are all sets of covered products, including “line sets” of seamless refined copper tubes (with or without fittings or insulation) suitable for connecting an outdoor air conditioner or heat pump to an indoor evaporator unit. The phrase “all sets of covered products” denotes any combination of items put up for sale that is comprised of merchandise subject to the scope.
“Refined copper” is defined as: (1) metal containing at least 99.85 percent by weight of copper; or (2) metal containing at least 97.5 percent by weight of copper, provided that the content by weight of any other element does not exceed the following limits:
ELEMENT LIMITING CONTENT PERCENT BY WEIGHT
Ag - Silver 0.25
As - Arsenic 0.5
Cd - Cadmium 1.3
Cr - Chromium 1.4
Mg - Magnesium 0.8
Pb - Lead 1.5
S - Sulfur 0.7
Sn - Tin 0.8
Te - Tellurium 0.8
Zn - Zinc 1.0
Zr - Zirconium 0.3
Other elements (each) 0.3
Excluded from the scope of these orders are all seamless circular hollows of refined copper less than 12 inches in length whose OD (actual) exceeds its length
7202.30.0000 7202.99.5040
硅锰
Silicomanganese The merchandise covered by this order is silicomanganese. Silicomanganese, which is
sometimes called ferrosilicon manganese, is a ferroalloy composed principally of manganese, silicon, and iron, and normally containing much smaller proportions of minor elements, such as carbon, phosphorous and sulfur. Silicomanganese generally contains by weight not less than four percent iron, more than 30 percent manganese, more than eight percent silicon and not more than three percent phosphorous. All compositions, forms and sizes of silicomanganese are included within the scope of this investigation, including silicomanganese slag, fines and briquettes. Silicomanganese is used primarily in steel production as a source of both silicon and manganese. This investigation covers all silicomanganese, regardless of its tariff classification
2804.69.10  2804.69.50
硅金属
Silicon Metal Imports covered by this review are shipments of silicon metal containing at least 96.00 but less than 99.99 percent of silicon by weight. Also covered by this review is silicon metal from the PRC containing between 89.00 and 96.00 percent silicon by weight but which contains a higher aluminum content than the silicon metal containing at least 96.00 percent but less than 99.99 percent silicon by weight.
2804.61.00
半导体级硅
Semiconductor-grade silicon (silicon metal containing by weight not less than 99.99 percent of silicon
8545.11.0010, 3801.10 , and 8545.11.0020
小直径石墨电极
Small Diameter Graphite Electrodes The merchandise covered by the order includes all small diameter graphite electrodes of any length, whether or not finished, of a kind used in furnaces, with a nominal or actual diameter of 400 millimeters (16 inches) or less, and whether or not attached to a graphite pin joining system or any other type of joining system or hardware. The merchandise covered by the order also includes graphite pin joining systems for small diameter graphite electrodes, of any length, whether or not finished, of a kind used in furnaces, and whether or not the graphite pin joining system is attached to, sold with, or sold separately from, the small diameter graphite electrode. Small diameter graphite electrodes and graphite pin joining systems for small diameter graphite electrodes are most commonly used in primary melting, ladle metallurgy, and specialty furnace applications in industries including foundries, smelters, and steel refining operations. Small diameter graphite electrodes and graphite pin joining systems for small diameter graphite electrodes  
2835.39.5000, 3824.90.3900
六聚偏磷酸钠
Sodium Hexametaphosphate the merchandise subject to this order is sodium hexametaphosphate. Sodium hexametaphosphate is a water-soluble polyphosphate glass that consists of a distribution of polyphosphate chain lengths. It is a collection of sodium polyphosphate polymers built on repeating NaPO3 units. Sodium hexametaphosphate has a P2O5 content from 60 to 71 percent. Alternate names for sodium hexametaphosphate include the following: Calgon; Calgon S; Glassy Sodium Phosphate; Sodium Polyphosphate, Glassy; Metaphosphoric Acid; Sodium Salt; Sodium Acid Metaphosphate; Graham’s Salt; Sodium Hex; Polyphosphoric Acid, Sodium Salt; Glass H; Hexaphos; Sodaphos; Vitrafos; and BAC-N-FOS. Sodium hexametaphosphate is typically sold as a white powder or granule (crushed) and may also be sold in the form of sheets (glass) or as a liquid solution.The product covered by this order includes sodium hexametaphosphate in all grades, whether food grade or technical grade. The product covered by this review includes sodium hexametaphosphate without regard to chain length i.e., whether regular or long chain. The product covered by this review includes sodium hexametaphosphate without regard to physical form, whether glass, sheet, crushed, granule, powder, fines, or other form, and whether or not in solution. However, the product covered by this order does not include sodium hexametaphosphate when imported in a blend with other materials in which the sodium hexametaphosphate accounts for less than 50 percent by volume of the finished product.
2834.10.1000
亚硝酸钠
Sodium Nitrite The merchandise subject to this order is sodium nitrite in any form, at any purity level. In addition, the sodium nitrite covered by these orders may or may not contain an anti-caking agent. Examples of names commonly used to reference sodium nitrite are nitrous acid, sodium salt, anti-rust, diazotizing salts, erinitrit, and filmerine
3604.10.00
闪烁发光物(尤指烟火)
Sparklers The products covered by this order are sparklers from the People’s Republic of China (PRC). Sparklers are fireworks each comprising a cut-to-length wire, one end of which is coated with a chemical mix that emits bright sparks while burning. 
7214.20.00, 7228.30.8050, 7222.11.0050, 7222.30.0000, 7228.60.6000, 7228.20.1000, 7228.30.8010,7222.11.0056, 7222.30.0011, 7222.11.0057, 7222.11.0059, 7222.30.0022, 7222.30.0024
钢筋棒
Steel Concrete Reinforcing Bars  The product covered . . . is all steel concrete reinforcing bars sold in straight lengths, 
7308.90.7000
光栅或钢格栅板
Steel Grating The products covered by this order are certain steel grating, consisting of two or more pieces of steel, including load-bearing pieces and cross pieces, joined by any assembly process, regardless of: (1) size or shape; (2) method of manufacture; (3) metallurgy (carbon, alloy, or stainless); (4) the profile of the bars; and (5) whether or not they are galvanized, painted, coated, clad or plated. Steel grating is also commonly referred to as “bar grating,” although the components may consist of steel other than bars, such as hot-rolled sheet, plate, or wire rod The scope of this order excludes expanded metal grating, which is comprised of a single piece or coil of sheet or thin plate steel that has been slit and expanded, and does not involve welding or joining of multiple pieces of steel. The scope of this order also excludes plank type safety grating which is comprised of a single piece or coil of sheet or thin plate steel, typically in thickness of 10 to 18 gauge, that has been pierced and cold formed, and does not involve welding or joining of multiple pieces of steel.
7317.00.55, 7317.00.65, 7317.00.75,  7907.00.6000.
钢钉
Steel Nails  The merchandise covered by this order includes certain steel nails having a shaft length up to 12 inches. Certain steel nails include, but are not limited to, nails made of round wire and nails that are cut. Certain steel nails may be of one piece construction or constructed of two or more pieces. Certain steel nails may be produced from any type of steel, and have a variety of finishes, heads, shanks, point types, shaft lengths and shaft diameters. Finishes include, but are not limited to, coating in vinyl, zinc (galvanized, whether by electroplating or hot dipping one or more times), phosphate cement, and paint. Head styles include, but are not limited to, flat, projection, cupped, oval, brad, headless, double, countersunk, and sinker. Shank styles include, but are not limited to, smooth, barbed, screw threaded, ring shank and fluted shank styles. Screw-threaded nails subject to this proceeding are driven using direct force and not by turning the fastener using a tool that engages with the head. Point styles include, but are not limited to, diamond, blunt, needle, chisel and no point. Finished nails may be sold in bulk, or they may be collated into strips or coils using materials such as plastic, paper, or wire Excluded from the scope of this order are steel roofing nails of all lengths and diameter, whether collated or in bulk, and whether or not galvanized. Steel roofing nails are specifically enumerated and identified in ASTM Standard F 1667 (2005 revision) as Type I, Style 20 nails. Also excluded from the scope are the following steel nails: 1) Non-collated (i.e., hand-driven or bulk), two-piece steel nails having plastic or steel washers (caps) already assembled to the nail, having a bright or galvanized finish, a ring, fluted or spiral shank, an actual length of 0.500” to 8”, inclusive; and an actual shank diameter of 0.1015” to 0.166”, inclusive; and an actual washer or cap diameter of 0.900” to 1.10”, inclusive; 2) Non-collated (i.e., hand-driven or bulk), steel nails having a bright or galvanized finish, a smooth, barbed or ringed shank, an actual length of 0.500” to 4”, inclusive; an actual shank diameter of 0.1015” to 0.166”, inclusive; and an actual head diameter of 0.3375” to 0.500”, inclusive; 3) Wire collated steel nails, in coils, having a galvanized finish, a smooth, barbed or ringed shank, an actual length of 0.500” to 1.75”, inclusive; an actual shank diameter of 0.116” to 0.166”, inclusive; and an actual head diameter of 0.3375” to 0.500”, inclusive; and 4) Non-collated (i.e., hand-driven or bulk), steel nails having a convex head (commonly known as an umbrella head), a smooth or spiral shank, a galvanized finish, an actual length of 1.75” to 3”, inclusive; an actual shank diameter of 0.131” to 0.152”, inclusive; and an actual head diameter of 0.450” to 0.813”, inclusive.

Also excluded from the scope of this order are corrugated nails. A corrugated nail is made of a small strip of corrugated steel with sharp points on one side. Also excluded from the scope of this order are fasteners suitable for use in powder-actuated hand tools, not threaded and threaded, which are currently classified under HTSUS 7317.00.20 and 7317.00.30. Also excluded from the scope of this order are thumb tacks, which are currently classified under HTSUS 7317.00.10.00.
Also excluded from the scope of this order are certain brads and finish nails that are equal to or less than 0.0720 inches in shank diameter, round or rectangular in cross section, between 0.375 inches and 2.5 inches in length, and that are collated with adhesive or polyester film tape backed with a heat seal adhesive. Also excluded from the scope of this order are fasteners having a case hardness greater than or equal to 50 HRC, a carbon content greater than or equal to 0.5 percent, a round head, a secondary reduced-diameter raised head section, a centered shank, and a smooth symmetrical point, suitable for use in gas-actuated hand tools. While the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this order is dispositive.
7318.15.5051, 7318.15.5056, 7318.15.5090,  7318.15.2095
钢制螺杆
Steel Threaded Rod The merchandise covered by the order is steel threaded rod. Steel threaded rod is certain threaded rod, bar, or studs, of carbon quality steel, having a solid, circular cross section, of any diameter, in any straight length, that have been forged, turned, cold–drawn, cold–rolled, machine straightened, or otherwise cold–finished, and into which threaded grooves have been applied. In addition, the steel threaded rod, bar, or studs subject to the order are non–headed and threaded along greater than 25 percent of their total length. A variety of finishes or coatings, such as plain oil finish as a temporary rust protectant, zinc coating (i.e., galvanized, whether by electroplating or hot-dipping), paint, and other similar finishes and coatings, may be applied to the merchandise.

Included in the scope of the order are steel threaded rod, bar, or studs, in which: (1) iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated:

• 1.80 percent of manganese, or
• 1.50 percent of silicon, or
• 1.00 percent of copper, or
• 0.50 percent of aluminum, or
• 1.25 percent of chromium, or
• 0.30 percent of cobalt, or
• 0.40 percent of lead, or
• 1.25 percent of nickel, or
• 0.30 percent of tungsten, or
• 0.012 percent of boron, or
• 0.10 percent of molybdenum, or
• 0.10 percent of niobium, or
• 0.41 percent of titanium, or
• 0.15 percent of vanadium, or
• 0.15 percent of zirconium.
Excluded from the scope of the order are: (a) threaded rod, bar, or studs which are threaded only on one or both ends and the threading covers 25 percent or less of the total length; and (b) threaded rod, bar, or studs made to American Society for Testing and Materials (“ASTM”) A193 Grade B7, ASTM A193 Grade B7M, ASTM A193 Grade B16, or ASTM A320 Grade L7.
7326.20.0020, 7323.99.9060,  7323.99.9080.
钢丝衣架; 钢丝衣架产品
Steel Wire Garment Hangers The merchandise that is subject to the order is steel wire garment hangers, fabricated from carbon steel wire, whether or not galvanized or painted, whether or not coated with latex or epoxy or similar gripping materials, and/or whether or not fashioned with paper covers or capes (with or without printing) and/or nonslip features such as saddles or tubes. These products may also be referred to by a commercial designation, such as shirt, suit, strut, caped, or latex (industrial) hangers. Specifically excluded from the scope of the order are wooden, plastic, and other garment hangers that are not made of steel wire. Also excluded from the scope of the order are chrome-plated steel wire garment hangers with a diameter of 3.4 mm or greater. 
2933.69.6050, 2921.59.4000 2921.59.8090
光学增白剂; 二苯乙烯光学增白剂
Stilbenic Optical Brightening Agents The stilbenic OBAs covered by this order are all forms (whether free acid or salt) of compounds known as triazinylaminostilbenes (i.e., all derivatives of 4,4’-bis [1,3,5- triazin-2-yl] The brackets in this sentence are part of the chemical formula. amino-2,2’-stilbenedisulfonic acid), except for compounds listed in the following paragraph. The stilbenic OBAs covered by this order include final stilbenic OBA products, as well as intermediate products that are themselves triazinylaminostilbenes produced during the synthesis of stilbenic OBA products.
Excluded from this order are all forms of 4,4’-bis[4-anilino-6-morpholino-1,3,5-triazin-2-yl] Id. amino-2,2’-stilbenedisulfonic acid, C40H40N12O8S2 (“Fluorescent Brightener 71”). This order covers the above-described compounds in any state (including but not limited to powder, slurry, or solution), of any concentrations of active stilbenic OBA ingredient, as well as any compositions regardless of additives (i.e., mixtures or blends, whether of stilbenic OBAs with each other, or of stilbenic OBAs with additives that are not stilbenic OBAs),
2921.42.22 2921.42.90
磺胺酸,对氨基苯磺酸
Sulfanilic Acid The products covered by this investigation are all grades of sulfanilic acid, which include technical (or crude) sulfanilic acid, refined (or purified) sulfanilic acid and sodium salt of sulfanilic acid (sodium sulfanilate).

Sulfanilic acid is a synthetic organic chemical produced from the direct sulfonation of aniline with sulfuric acid. Sulfanilic acid is used as a raw material in the production of optical brighteners, food colors, specialty dyes, and concrete additives. The principal differences between the grades are the undesirable quantities of residual aniline and alkali
insoluble materials present in the sulfanilic acid. All grades are available as dry free flowing powders.

Technical sulfanilic acid contains 96 percent minimum sulfanilic acid, 1.0 percent maximum aniline, and 1.0 percent maximum alkali insoluble materials. Refined sulfanilic acid contains 98 percent minimum sulfanilic acid, 0.5 percent maximum aniline and 0.25 percent maximum alkali insoluble materials.

Sodium salt is a powder, granular or crystalline material which contains 75 percent minimum equivalent sulfanilic acid, 0.5 percent maximum aniline based on the equivalent sulfanilic acid content, and 0.25 percent maximum alkali insoluble materials based on the equivalent sulfanilic acid content.
8482.20.00, 8482.91.00.50, 8482.99.15, 8482.99.45, 8483.20.40, 8483.20.80, 8483.30.80, 8483.90.20, 8483.90.30, 8483.90.80, 8708.70.6060, 8708.99.2300, 8708.99.4850, 8708.99.6890, 8708.99.8115, 8708.99.8180.
圆锥滚子轴承
Tapered Roller Bearings  Imports covered by the order are shipments of tapered roller bearings and parts thereof, finished and unfinished, from the PRC; flange, take up cartridge, and hanger units incorporating tapered roller bearings; and tapered roller housings (except pillow blocks) incorporating tapered rollers, with or without spindles, whether or not for automotive use
2932.13.00.00
四氢糠醇,酒精, 四氢呋喃甲醇
Tetrahydrofurfuryl Alcohol The product covered by this order is tetrahydrofurfuryl alcohol (C5H10O2) (‘‘THFA’’). THFA, a primary alcohol, is a clear, water white to pale yellow liquid. THFA is a member of the heterocyclic compounds known as furans and is miscible with water and soluble in many common organic solvents. 
4802.30; 4802.54; 4802.61; 4802.62; 4802.69; 4804.31.1000;
4804.31.2000; 4804.31.4020; 4804.31.4040; 4804.31.6000; 4804.39; 4805.91.1090; 4805.91.5000; 4805.91.7000; 4806.40; 4808.30; 4808.90; 4811.90; 4823.90; 4820.50.00; 4802.90.00; 4805.91.90; 9505.90.40.
薄纸制品; 绵纸制品
Tissue Paper Products  The tissue paper products subject to this order are cut-to-length sheets of tissue paper having a basis weight not exceeding 29 grams per square meter. Tissue paper products subject to this order may or may not be bleached, dye-colored, surface-colored, glazed, surface
decorated or printed, sequined, crinkled, embossed, and/or die cut. The tissue paper subject to this order is in the form of cut-to-length sheets of tissue paper with a width equal to or greater than one-half (0.5) inch. Subject tissue paper may be flat or folded, and may be
packaged by banding or wrapping with paper or film, by placing in plastic or film bags, and/or by placing in boxes for distribution and use by the ultimate consumer. Packages of tissue paper subject to this order may consist solely of tissue paper of one color and/or style, or
may contain multiple colors and/or styles.
Excluded from the scope of this order are the following tissue paper products: (1) tissue paper products that are coated in wax, paraffin, or polymers, of a kind used in floral and food service
applications; (2) tissue paper products that have been perforated, embossed, or die-cut to the shape of a toilet seat, i.e., disposable sanitary covers for toilet seats; (3) toilet or facial tissue stock, towel or napkin stock, paper of a kind used for household or sanitary purposes, cellulose wadding, and webs of cellulose fibers (HTSUS 4803.00.20.00 and 4803.00.40.00).
8432.40.0000, 8432.80.0000, 8432.80.0010, 8432.90.0030, 8432.90.0080, 8479.89.9896, 8479.89.9897, 8479.90.9496,  9603.50.0000 拖在后面的剪草工具及部件 Tow-Behind Lawn Groomers And Parts Thereof The scope of this order covers certain non-motorized tow behind lawn groomers, manufactured from any material, and certain parts thereof. Lawn groomers are defined as lawn sweepers, aerators, dethatchers, and spreaders. Unless specifically excluded, lawn groomers that are designed to perform at least one of the functions listed above are included in the scope of this order, even if the lawn groomer is designed to perform additional non-subject functions (e.g., mowing).

All lawn groomers are designed to incorporate a hitch, of any configuration, which allows the product to be towed behind a vehicle. Lawn groomers that are designed to incorporate both a hitch and a push handle, of any type, are also covered by the scope of this order. The hitch and handle may be permanently attached or removable, and they may be attached on opposite sides or on the same side of the lawn groomer. Lawn groomers designed to incorporate a hitch, but where the hitch is not attached to the lawn groomer, are also included in the scope of the order.
Lawn sweepers consist of a frame, as well as a series of brushes attached to an axle or shaft which allows the brushing component to rotate. Lawn sweepers also include a container (which is a receptacle into which debris swept from the lawn or turf is deposited) supported by the frame. Aerators consist of a frame, as well as an aerating component that is attached to an axle or shaft which allows the aerating component to rotate. The aerating component is made up of a set of knives fixed to a plate (known as a “plug aerator”), a series of discs with protruding spikes (a “spike aerator”), or any other configuration, that are designed to create holes or cavities in a lawn or turf surface. Dethatchers consist of a frame, as well as a series of tines designed to remove material (e.g., dead grass or leaves) or other debris from the lawn or turf. The dethatcher tines are attached to and suspended from the frame. Lawn spreaders consist of a frame, as well as a hopper (i.e., a container of any size, shape, or material) that holds a media to be spread on the lawn or turf. The media can be distributed by means of a rotating spreader plate that broadcasts the media (“broadcast spreader”), a rotating agitator that allows the media to be released at a consistent rate (“drop spreader”), or any other configuration.

Lawn dethatchers with a net fully-assembled weight (i.e., without packing, additional weights, or accessories) of 100 pounds or less are covered by the scope of the order. Other lawn groomers—sweepers, aerators, and spreaders—with a net fully-assembled weight (i.e., without packing, additional weights, or accessories) of 200 pounds or less are covered by the scope of the order.
Also included in the scope of the order are modular units, consisting of a chassis that is designed to incorporate a hitch, where the hitch may or may not be included, which allows modules that perform sweeping, aerating, dethatching, or spreading operations to be interchanged. Modular units—when imported with one or more lawn grooming modules—with a fully assembled net weight (i.e., without packing, additional weights, or accessories) of 200 pounds or less when including a single module, are included in the scope of the order. Modular unit chasses, imported without a lawn grooming module and with a fully assembled net weight (i.e., without packing, additional weights, or accessories) of 125 pounds or less, are also covered by the scope of the order. When imported separately, modules that are designed to perform subject lawn grooming functions (i.e., sweeping, aerating, dethatching, or spreading), with a fully assembled net weight (i.e., without packing, additional weights, or accessories) of 75 pounds or less, and that are imported with or without a hitch, are also covered by the scope.

Lawn groomers, assembled or unassembled, are covered by this order. For purposes of this order, “unassembled lawn groomers” consist of either 1) all parts necessary to make a fully assembled lawn groomer, or 2) any combination of parts, constituting a less than complete, unassembled lawn groomer, with a minimum of two of the following “major components”:

1) an assembled or unassembled brush housing designed to be used in a lawn sweeper, where a brush housing is defined as a component housing the brush assembly, and consisting of a wrapper which covers the brush assembly and two end plates attached to the wrapper;
2) a sweeper brush;
3) an aerator or dethatcher weight tray, or similar component designed to allow weights of any sort to be added to the unit;
4) a spreader hopper;
5) a rotating spreader plate or agitator, or other component designed for distributing media in a lawn spreader;
6) dethatcher tines;
7) aerator spikes, plugs, or other aerating component; or
8) a hitch, defined as a complete hitch assembly comprising of at least the following two major hitch components, tubing and a hitch plate regardless of the absence of minor components such as pin or fasteners. Individual hitch component parts, such as tubing, hitch plates, pins or fasteners are not covered by the scope.

The major components or parts of lawn groomers that are individually covered by this order under the term “certain parts thereof” are: (1) brush housings, where the wrapper and end plates incorporating the brush assembly may be individual pieces or a single piece; and (2) weight trays, or similar components designed to allow weights of any sort to be added to a dethatcher or an aerator unit. 
The scope of this order specifically excludes the following: 1) agricultural implements designed to work (e.g., churn, burrow, till, etc.) soil, such as cultivators, harrows, and plows; 2) lawn or farm carts and wagons that do not groom lawns; 3) grooming products incorporating a motor or an engine for the purpose of operating and/or propelling the lawn groomer; 4) lawn groomers that are designed to be hand held or are designed to be attached directly to the frame of a vehicle, rather than towed; 5) “push” lawn grooming products that incorporate a push handle rather than a hitch, and which are designed solely to be manually operated; 6) dethatchers with a net assembled weight (i.e., without packing, additional weights, or accessories) of more than 100 pounds, or lawn groomers—sweepers, aerators, and spreaders—with a net fully-assembled weight (i.e., without packing, additional weights, or accessories) of more than 200 pounds; and 7) lawn rollers designed to flatten grass and turf, including lawn rollers which incorporate an aerator component (e.g., “drum-style” spike aerators). 
9404.29.9010  9404.10.0000, 7326.20.0070, 7320.20.5010,  7320.90.5010
未加盖的内装弹簧件
Uncovered Innerspring Units The merchandise subject to this order is uncovered innerspring units composed of a series of individual metal springs joined together in sizes corresponding to the sizes of adult
mattresses (e.g., twin, twin long, full, full long, queen, California king, and king) and units used in smaller constructions, such as crib and youth mattresses. All uncovered innerspring
units are included in this scope regardless of width and length. Included within this definition are innersprings typically ranging from 30.5 inches to 76 inches in width and 68 inches to 84
inches in length. Innersprings for crib mattresses typically range from 25 inches to 27 inches in width and 50 inches to 52 inches in length.

Uncovered innerspring units are suitable for use as the innerspring component in the manufacture of innerspring mattresses, including mattresses that incorporate a foam encasement around the innerspring.

Pocketed and non–pocketed innerspring units are included in this definition. Non–pocketed innersprings are typically joined together with helical wire and border rods. Non–pocketed
innersprings are included in this definition regardless of whether they have border rods attached to the perimeter of the innerspring. Pocketed innersprings are individual coils
covered by a ‘‘pocket’’ or ‘‘sock’’ of a nonwoven synthetic material or woven material and then glued together in a linear fashion.
7308.20.0020
实用规模风塔
Utility Scale Wind Towers The merchandise covered by this order are certain wind towers, whether or not tapered, and sections thereof. Certain wind towers are designed to support the nacelle and rotor blades in a wind turbine with a minimum rated electrical power generation capacity in excess of 100 kilowatts and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle (i.e., where the top of the tower and nacelle are joined) when fully assembled.
A wind tower section consists of, at a minimum, multiple steel plates rolled into cylindrical or conical shapes and welded together (or otherwise attached) to form a steel shell, regardless of coating, end-finish, painting, treatment, or method of manufacture, and with or without flanges, doors, or internal or external components (e.g., flooring/decking, ladders, lifts, electrical buss boxes, electrical cabling, conduit, cable harness for nacelle generator, interior lighting, tool and storage lockers) attached to the wind tower section. Several wind tower sections are normally required to form a completed wind tower.
Wind towers and sections thereof are included within the scope whether or not they are joined with nonsubject merchandise, such as nacelles or rotor blades, and whether or not they have internal or external components attached to the subject merchandise.
Specifically excluded from the scope are nacelles and rotor blades, regardless of whether they are attached to the wind tower. Also excluded are any internal or external components which are not attached to the wind towers or sections thereof.
7308.20.0020
风塔
Wind towers
8502.31.0000.
塔或塔的一部分
when imported as a tower or tower section(s) alone.
9403.50.9040
卧室木制家具
Wooden Bedroom Furniture The product covered by the order is wooden bedroom furniture. Wooden bedroom furniture is generally, but not exclusively, designed, manufactured, and offered for sale in coordinated groups, or bedrooms, in which all of the individual pieces are of approximately the same style and approximately the same material and/or finish. The subject merchandise is made substantially of wood products, including both solid wood and also engineered wood products made from wood particles, fibers, or other wooden materials such as plywood, oriented strand board, particle board, and fiberboard, with or without wood veneers, wood overlays, or laminates, with or without non-wood components or trim such as metal, marble, leather, glass, plastic, or other resins, and whether or not assembled, completed, or finished.

The subject merchandise includes the following items: (1) Wooden beds such as loft beds, bunk beds, and other beds; (2) wooden headboards for beds (whether stand-alone or attached to side rails), wooden footboards for beds, wooden side rails for beds, and wooden canopies for beds; (3) night tables, night stands, dressers, commodes, bureaus, mule chests, gentlemen's chests, bachelor's chests, lingerie chests, wardrobes, vanities, chessers, chifforobes, and wardrobe-type cabinets; (4) dressers with framed glass mirrors that are attached to, incorporated in, sit on, or hang over the dresser; (5) hests-on-chests
\1\, highboys \2\, lowboys \3\, chests of drawers \4\, chests \5\, door chests \6\, chiffoniers \7\, hutches \8\, and armoires \9\; (6) desks, computer stands, filing cabinets, book cases, or writing tables that are attached to or incorporated in the subject merchandise; and (7) other bedroom furniture consistent with the above list.
The scope of the Petition excludes the following items: (1) Seats, chairs, benches, couches, sofas, sofa beds, stools, and other seating furniture; (2) mattresses, mattress supports (including box springs), infant cribs, water beds, and futon frames; (3) office furniture, such as desks, stand-up desks, computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs, servers, sideboards, buffets, corner cabinets, china cabinets, and china hutches; (5) other non-bedroom furniture, such as television cabinets, cocktail tables, end tables, occasional tables, wall systems, book cases, and entertainment systems; (6) bedroom furniture made primarily of wicker, cane, osier, bamboo or rattan; (7) side rails for beds made of metal if sold separately from the headboard and footboard; (8) bedroom furniture in which bentwood parts predominate \10\; (9) jewelry armories \11\; (10) cheval mirrors \12\ (11) certain metal parts \13\ (12) mirrors that do not attach to, incorporate in, sit on, or hang over a dresser if they are not designed and marketed to be sold in conjunction with a dresser as part of a dresser-mirror set.
9403.50.9080
其它卧室用的木制家具
`other * * * wooden furniture of a kind used in the bedroom.'
9403.50.9040
木制床头板、脚踏板、旁轨和檐篷
wooden headboards for beds, wooden footboards for beds, wooden side rails for beds, and wooden canopies for beds
7009.92.5000
木头的一部分和玻璃镜框
"parts of wood'' and framed glass mirrors
6301.10.0000
编织电热毯
Woven Electric Blankets The scope of this order covers finished, semi-finished, and unassembled woven electric blankets, including woven electric blankets commonly referred to as throws, of all sizes and fabric types, whether made of man-made fiber, natural fiber or a blend of both. Semi-finished woven electric blankets and throws consist of shells of woven fabric containing wire. Unassembled woven electric blankets and throws consist of a shell of woven fabric and one or more of the following components when packaged together or in a kit: (1) wire; (2) controller(s). The shell of woven fabric consists of two sheets of fabric joined together forming a “shell.” The shell of woven fabric is manufactured to accommodate either the electric blanket’s wiring or a subassembly containing the electric blanket’s wiring (e.g., wiring mounted on a substrate). A shell of woven fabric that is not packaged together, or in a kit, with either wire, controller(s), or both, is not covered by this investigation even though the shell of woven fabric may be dedicated solely for use as a material in the production of woven electric blankets. 
3913.90.20
黄原胶
Xanthan Gum The scope of this order covers dry xanthan gum, whether or not coated or blended with other products. Further, xanthan gum is included in this order regardless of physical form, including, but not limited to, solutions, slurries, dry powders of any particle size, or unground fiber.
Xanthan gum that has been blended with other product(s) is included in this scope when the resulting mix contains 15 percent or more of xanthan gum by dry weight. Other products with which xanthan gum may be blended include, but are not limited to, sugars, minerals, and salts.
Xanthan gum is a polysaccharide produced by aerobic fermentation of Xanthomonas campestris. The chemical structure of the repeating pentasaccharide monomer unit consists of a backbone of two P-1,4-D-Glucose monosaccharide units, the second with a trisaccharide side chain consisting of P-D-Mannose-(1,4)- P-DGlucuronic acid-(1,2) - a-D-Mannose monosaccharide units. The terminal mannose may be pyruvylated and the internal mannose unit may be acetylated